locogato11283 Posted February 28, 2006 Report Posted February 28, 2006 +4 roundhouse carrier swingarm built by GT performance. 1/8" thick chromoly tube with 1/4" think reinforcing gusset on the bottom. very strong swingarm meant to take a lot of abuse. i ran this about half the hillclimb season last year with no issues. im just movin up to a +6 swingarm..the chain slider bracket got a little bent somehow but ill straighten it right back up. i am also gonna clean it up real good and bomb can it black so itll be fresh and ready to throw on.this does NOT use bearings. it uses bushings so no more stuck swingarm bolts..$260 shipped Quote
locogato11283 Posted March 1, 2006 Author Report Posted March 1, 2006 someone buy this damn swingarm. please Quote
BigRed350x Posted March 1, 2006 Report Posted March 1, 2006 Come on people! I bought one from him! Great guy to deal with. Quote
locogato11283 Posted March 2, 2006 Author Report Posted March 2, 2006 Bizzzzzumpppppp!!!!! 481157[/snapback] jeff dont u need a longer swingarm with that gorr porting and 4mm crank?? Quote
ellison445 Posted March 2, 2006 Report Posted March 2, 2006 Im still not sure until I get it put together.. Spoke with Rodney (Fixitrod) and he was running a 4 mill with a GRR port on a -2 swinger jeff dont u need a longer swingarm with that gorr porting and 4mm crank?? 481163[/snapback] Quote
broke Posted March 2, 2006 Report Posted March 2, 2006 Im still not sure until I get it put together.. Spoke with Rodney (Fixitrod) and he was running a 4 mill with a GRR port on a -2 swinger 481175[/snapback] Hell, I have one of Jims 12 port 4mils in my RZ motor and run a -2 swinger. It works great. I have been in the sand with Rodney, Banchetta and myself all with -2 swing arms, except for drag racing, they were great. Quote
BigRed350x Posted March 3, 2006 Report Posted March 3, 2006 I got my +4 heavy duty swinger from Loco today. All I can say is... DAMN that thing is heavy duty! I don't think I will ever have to worry about bending it. Plus the bushings kick ass, no more bearing worries or stuck bolts! All I need now is a roundhouse carrier and I will be set! Thanks loco! Quote
locogato11283 Posted March 3, 2006 Author Report Posted March 3, 2006 I got my +4 heavy duty swinger from Loco today. All I can say is... DAMN that thing is heavy duty! I don't think I will ever have to worry about bending it. Plus the bushings kick ass, no more bearing worries or stuck bolts! All I need now is a roundhouse carrier and I will be set! Thanks loco! 481232[/snapback] no problem man! Quote
ellison445 Posted March 4, 2006 Report Posted March 4, 2006 Thats Hindu for Bump dfsagd 481482[/snapback] Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.