humilde12a Posted January 19, 2006 Report Posted January 19, 2006 was up guys ,whats the best drag clutch out there, my barnetts are slipping too much! Quote
locogato11283 Posted January 19, 2006 Report Posted January 19, 2006 the FAST clutch setup works pretty damn well. you may find that your clutch is not the only problem. the basket, hubs and pressure plate could be worn. if so, a new clutch will mask the problem for a while, and then go back to slipping. if you are dragging i would get a clutch lockout. thats the best way to ensure no slipping when dragging... Quote
bigboybanshee Posted January 19, 2006 Report Posted January 19, 2006 the FAST clutch setup works pretty damn well. you may find that your clutch is not the only problem. the basket, hubs and pressure plate could be worn. if so, a new clutch will mask the problem for a while, and then go back to slipping. if you are dragging i would get a clutch lockout. thats the best way to ensure no slipping when dragging... 461771[/snapback] Don't think I could have said it better myself! Quote
alcoholbanshee Posted January 19, 2006 Report Posted January 19, 2006 Agreed on the lockup. As for clutches, I have always had real good luck with EBC fibers. But recently I have been using Yami streetbike fibers with real good success. Quote
blueshee03 Posted January 19, 2006 Report Posted January 19, 2006 fzr clutches work great for drag racing or any riding.drag racing with higher horse power a lock up is a great investment.however if you install a lockup also install a bearing kit to prevent the ball,adjuster and clutch pushrod from melting themselves together and possibly even ruining the tranny shaftthe pushrod runs through.even without the lockup the bearing kit is a great investment. Quote
locogato11283 Posted January 20, 2006 Report Posted January 20, 2006 fzr clutches work great for drag racing or any riding.drag racing with higher horse power a lock up is a great investment.however if you install a lockup also install a bearing kit to prevent the ball,adjuster and clutch pushrod from melting themselves together and possibly even ruining the tranny shaftthe pushrod runs through.even without the lockup the bearing kit is a great investment. 461890[/snapback] thats no shit. learned the hard way on the dyno when my bro welded his ball to the rod on the slow down. the ball and rod welded themselves to the shaft..had to get a whole new shaft cuz we couldnt get that fucker out for anything... Quote
humilde12a Posted January 20, 2006 Author Report Posted January 20, 2006 where can i gat the fzr clutches? Quote
alcoholbanshee Posted January 20, 2006 Report Posted January 20, 2006 Right from Yami........I'll get you the part numbers later tonight, I have them written down out in the shop. They should be like $6-$8 per fiber. Quote
alcoholbanshee Posted January 20, 2006 Report Posted January 20, 2006 The Yami # is 4H7-16321-02. Quote
Shee-Male Posted January 21, 2006 Report Posted January 21, 2006 do a search, there was a post a while back on how the fzr and the inexpensive tusk clutches were identical. Quote
enFORCER Posted January 21, 2006 Report Posted January 21, 2006 where can i gat the fzr clutches? 462222[/snapback] You can get them from : Bob Tracey's world of cycles. Phone # (412-269-9999)I use the Barnett steel's , but the Barnett friction plates are junk. I'm running a lock out with the Yamaha street bike friction plates and Barnett steels. Part# for the friction plates are: 4H7-16321-02 Part# for the Barnett steels(drive plates) are: 2012-240 Quote
rocketboy Posted January 21, 2006 Report Posted January 21, 2006 do a search, there was a post a while back on how the fzr and the inexpensive tusk clutches were identical. 462388[/snapback] yep the FZR fibers are same as a tusk Quote
race-a-holic Posted January 23, 2006 Report Posted January 23, 2006 My barnetts were doing great.I switched to shearer pipes and alcohol carbs.,and they went bad very quickly.I bought my new clutchs from Jeff at F.A.S.T.Racing. Quote
87sheerips Posted February 7, 2006 Report Posted February 7, 2006 sweet i just bought a tusk kit with HD springs. I hope it works nice fopr ice drags this weekend!!! Quote
camatv Posted February 11, 2006 Report Posted February 11, 2006 tusk clutch is very good for the $$$ my bud ran one on his tt 4 mil and it held up nicely.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.