Jump to content

Recommended Posts

Posted

is there not a way of just retouting the hoses and keeping it there for assurance of not running low on coolant,

 

ive been considering it myself, and it seems that it would be possible to just run the overflow line that spills on the pipes to somewhere else?

Posted
Loco, are you being just that " Loco" or are you being serious?

446770[/snapback]

im bein serious. i dont run an overflow on any of my bikes. just run that overflow tube straight to the ground...

Posted

...i relocated mine to the front under the nose just for something to do on a shitty day. dunno if it does nething or not. lots of other people i'm sure have done it. hell some companies sell a bracket u can use to mount it in.

Posted (edited)

I moved mine to the front also, it holds extra coolant (which is also typical cooler than the coolant int he radiator). It does work up front under the nose WAY better. I notice it changes levels all the time. It also does not spill onto my pipes anymore due to the line having to go almsot up the the bars before coming out onto the pipe. That and the engine ice :cheers:

 

Personaly I like it. It's hard to tell if your coolant is full without one (without pulling off the plastics to check after every ride.) As long as there is coolant in the bottle your radiator should be full.

 

Typicaly when you are going up a hill or going down a hill, or when your radiator gets hot the coolant expands cools off etc it needs to release coolant or suck some back in. If you run without a bottle there is a good chance your radiator is not 100% full all the time. It can spit some coolant back out but it can't suck anything back in. Same principle as on a car, if you don't fill your radiator up all the way you might not need to overflow bottle... ;)

 

I personly don't care about a little extra weight, but then again I ride my Banshee for long periods of time not just 10 seconds down a drag strip.

Edited by Justintoxicated
Posted

it doesnt allow your engine to run any cooler or increase capacity ,it is just a holding tank for spewed antifreeze.for drag applications you can aim the hoses onto your pipes down low ,if your shit is gonna dangerously overheat and spew , wouldnt you want to know about it? ,before it causes topend $$$ problems?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...