Bars

[2003LimitedBanshee]

I need a bit of help finding a raised mount or bars with more rise. My dad also has a shee and he complains about his bars being too low (he's 6'3") if he has to stand up. I did some searching but didn't find exactly what I was looking for so... Does anyone know if some company makes stock size 7/8" bars that have a bigger rise than stock (maybe 2"). Or does anyone know of a company that makes a +2" riser for the stock 7/8" bars? Open to other ideas also. He didn't really say he wanted the fat bars, so... Christmas Hunting any help appreciated. Thanks!

[dawarriorman]

If you get a set of fat bars, you can get the adapters that just bolt on to your existing clamps, and put you 3/4" higher. That with a high bend handlebar should be plenty.

[brilei5]

ROX Riser is the slickest way to go. Sled guys use them mostly, but I am pretty sure thet are 7/8. With these you can really fine tune your bar posistion ie. foward, back and up. Do a google search for ROX riser and a few sites where you can buy them will pop up. GOOD LUCK I think they come anti vibe as well if you want.

[2003LimitedBanshee]

Thanks for all the replies so far... the other question is how much this will affect using the stock controls. I am betting you probably have to run a different clutch cable, and throttle cable? New brake lines?? Any help??? Thanks!

[Shee-Male]

I like my bars high ( being 6'1'') and I run a +1 1/2 stem w/atv high bend renthal fatbars and the adapters and didn't have to lengthen anything.

I also recently came across some acerebis bars that are pretty high and dobble adjustable, you may wanna check them out, there 7/8

[banshee tuner]

I have the msr dominator aluminum bars with the atv bend, they only cost like 35 bucks but I did have to get a longer brake cable so I added stainless lines on the front. I am 6'1 and they are perfect for me.