Idles, but does not go when I hit the throttle

[Rodeoranger]

I have a 97 Banshee. It will idle fine but when I hit the throttle it acts like the TORS are kicking in. I have it disconnected it. Put new coil, stator in and still acts like the TORS are kicking in just like when the parking brake is on.everthing is disconnected. What do I look at next?????

[FOXBANSHEE30]

i had that problem one time and my front sprocket had came off and thats why mine wouldnt move. The nut had backed off. LOL. MEADOWS. <<<CWB>>>

[Toomey Banshee]

Did you unplug the parking brake?

[2_stroke_me03]

if the tors is givin you the problem just buy the kit and eliminate it

[Ruko]

Make sure the park brake is also unhooked. There is a wire coming from it that needs to be disconnected as well. A buddy of mine had his do the same thing a couple weeks ago. He unhooked the TORS but it still wouldn't go. Then he shook the park brake wire and waalaa it came right back to life. He already had his plastic back on so he rode like that all day and unhooked it later. So his next mod will be a TORS removal kit.

[Rodeoranger]

The parking brake and everything associated with the TORS has been diconnect or removed completly. I thought if all that was removed or disconnected that should have done it. Is there anything else that I might be missing???

[2_stroke_me03]

make sure

that you put the slides back in the same carb because if they get put in the wrong carb it will run like shit.A buddy of mine did that because the slides will fit in either side . And it ran like shit so i told him to switch the slides and it runs perfect now

[Rodeoranger]

I have the 2 into 1 carb kit. So I have only one slide to worry about. I swear it acts just like when the parking brake is applied. MORE HELP PLEASE.

[[email protected]]

I have the 2 into 1 carb kit. So I have only one slide to worry about. I swear it acts just like when the parking brake is applied. MORE HELP PLEASE.

420452[/snapback]

 

disocnect tor's disconect & the thing inside the throttle ( the clicker majiggy )

 

im using 2-1 and that was my problem now works fine

[taldoc3]

need a tors removal kit

[Otis]

The parking brake and everything associated with the TORS has been diconnect or removed completly. I thought if all that was removed or disconnected that should have done it. Is there anything else that I might be missing???

 

You say that the parking brake has been disconnected, and removed..... When you took the parking brake off the rear end, did you put a "block off" in it's place??

[Otis]

this thing a ma bob

[jaysea1]

Like a couple of the other guys said, you need to disconnect the tors at the box, but also at the parking brake connection(near the steering stem) if this isn't disconnected, you won't be able to go above idle.

[Rodeoranger]

Thank you thank you Miami@atv It was that clicky thing at the thotle. I cut that out of the system and Vavum...IT'S ALIVE AGAIN, ALIVE, ALIVE AGAIN.......JUST RAN DOWN THE STREET WOT...IT WAS GREAT....THANKS TO EVERONE....

[[email protected]]

Thank you thank you Miami@atv It was that clicky thing at the thotle. I cut that out of the system and Vavum...IT'S ALIVE AGAIN, ALIVE, ALIVE AGAIN.......JUST RAN DOWN THE STREET WOT...IT WAS GREAT....THANKS TO EVERONE....

421182[/snapback]

 

 

man i had a bad night sleep when my shee " didnt work " woke up and read some threads on banshee hq and started disconecting shit . i was so boosted when my bike revved i went riding around the streets in my boxers lol . GOTTA LOVE stupid problems and how they make you feel smart when u figure it out . But that clicker majiggy bullshit is only problems to me . i cut myne off lol .

 

BY THE WAY post some vids of the shee runnin , i love to hear powerbands . god bless your shee