2twin350s Posted August 27, 2005 Report Posted August 27, 2005 i have heard a lot about the over flow bottle relocating trick,does this stop the over flow pucking on the pipes and can some one give me instructions on how to do this? i want to do it cheap i saw a link somewhere but cant recall how to do this, what are the benefits Quote
BansheeBoy17 Posted August 27, 2005 Report Posted August 27, 2005 My cousin and I dont even run one anymore. Quote
05bansh Posted August 27, 2005 Report Posted August 27, 2005 Some people cut thier airbox and leave on the back part where the bottle sits. I was too lazy to do that though, I just bought a bottle relocator for like 15.00 Quote
midnite Posted August 28, 2005 Report Posted August 28, 2005 I've taken them off my shees. I run the overflow tube between the pipes and then cut it an inch below the frame. I've had no problems with this set up. Quote
Redlined Posted August 28, 2005 Report Posted August 28, 2005 Get rid of it. If your bike is overheating, then you have other issues that you need to deal with. Try a Noss/Cool Head and some Engine Ice. Quote
Banshee~ Posted August 28, 2005 Report Posted August 28, 2005 http://kuoi.asui.uidaho.edu/~john/tips.html holyman, post some pic from the side if you have them. Quote
rocketboy Posted August 29, 2005 Report Posted August 29, 2005 (edited) they are useless pieces of plastic scrap IMO ,they have such little purpose to even have on a she Edited August 29, 2005 by rocketboy Quote
2twin350s Posted September 5, 2005 Author Report Posted September 5, 2005 thanks for the pics guys. i put a high flow pump in and tried the bike this weekend.the only time it got hot was when i built a new hill for a honda to go up. lol.my bike runs perfect, but the riding i do is slow hill climbing. a lot of big mountain hill climbing, some are a half mile long, and unfortunately, after about 20 minutes and 2 or 3 trips of that they just get hot. i can tell when it does and i just shut it off and drink a beer.it is not overheating it just pisses a little coolant on the pipe.i also run a 2 into 1 pipe and i know that they make the motor run hotter just becuase the extra back pressure. but the high flow pump made a big difference. i will probably go to engine ice. and try to get it even cooler. i like my stock head. it is shaved so i will wait on a noss head.plus i am trying to get a tri-z so saving for that and GAS MONEY! Quote
locogato11283 Posted September 5, 2005 Report Posted September 5, 2005 just ditch that piece of shit... they are worthless.. Quote
2twin350s Posted September 5, 2005 Author Report Posted September 5, 2005 ok i will take the tubes off and plug the bottom hole and run a tube to my helmet and fill it with beer Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.