Crank, rods, pistons, cylinders

[Bansheetwin]

I'm looking for some cylinders, pistons, rods, and crank. Whether they be stock or somewhat modified. Please let me know what you've got and what else I'll need to make it work.

 

Thanks

[broke]

I can help you out with the cylinders, rod, and crank. You will need to get them bored and put new pistons in.

[Bansheetwin]

Are they all stock size?

[braxton]

I'm looking for some cylinders, pistons, rods, and crank.  Whether they be stock or somewhat modified.  Please let me know what you've got and what else I'll need to make it work. 

 

Thanks

389035[/snapback]

$75 for cylinders

$400 complete bottom end with new crank replace in october

$2 heads $10 each

[BansheeBoy17]

.030 over wiseco pro lites...practically brand new.. too long of a story to type now, ill type if your interested tho, they just need rings and the stuff you need to install them (wrist pin, circlips etc.).. $40 shipped let me kno

[BenBB]

I've got a set of 20 over stock ported jugs that need a bore and a stock crank (core really, no probs but wouldn't hurt to rebuild it) both from my '96...

[lucky13]

i got some .020 over vito,s power pistons

and a good stock crank w/rods