quadridermx Posted May 30, 2005 Report Posted May 30, 2005 Picked up a 1990 Banshee in pieces that I'm parting out. This was a great running banshee before the previous owner took it apart and spent all the money on these brand new aftermarket parts only to loose his job before he could get it all back together. Here's what I have... 1) Trinity Racing Stage IV 2 into 1 complete setup - $275 This is just about BRAND NEW, in excellent shape, and ready to bolt on and go! Includes manifold, carb, carb to manifold boot, thumb throttle w/cable, and reed block w/reeds. The manifold and carb alone are selling for almost $500 on trinity's website. 2) Bills Pipes chrome pipes w/ silencers - $300 Again, pipes are just about BRAND NEW! No rust no dents barely even a scratch... in excellent shape and ready to bolt on. Silencers don't have any name on them but sound great, definitely aftermarket of some kind. Together these would retail for around $600 for the set. 3) Bottom end - $400 Comes with an almost BRAND NEW Wiseco Hot Rod crank and connecting rods. Crank and rods are PERFECT! Transmission is mint, clutch is good, all other gears are in good condition, side covers are perfect and very shiny. May be missing a few odds and ends, but price reflects that. NEEDS TO BE ASSEMBLED! This bottom end is in pieces, but you get everything I have including kick starter. Crank alone retails for over $500, and it's just about brand new. Add $100 for the cases, $75-100 for the transmission, $75 for the clutch assembly, and another $50 for misc parts and this is a squeal of a deal. 4) Cylinders w/head - $225 Fresh .050 bore. I don't have the equipment to verify .050 but they're definitely clean and ready to run. Cylinders are mint, head is good... both ready to go. Fresh black paint on the cylinders and head is very shiny and makes everything look brand new. 5) 1990 Complete Banshee rolling frame - $750 Chassis is just about spotless. It has some kind of tough blue paint on it that looks really good. Everything was coated correctly while the quad was apart and hasn't even been ridden on. Comes with: +2 axle DG alloy nerfs DG alloy front bumper Brand new black Maier plastics (older style) ITP rear rims with spider treks on back and holeshots on front Renthal bars Tether kill switch Ceet seat cover (the classic blue and white tiger stripe!) Aluminum rear grab bar 250r front shock setup Also comes with an excellent condition 250r rear shock to replace the stock banshee rear (worth an easy $150 alone!) Every bearing and bushing in the frame is brand new and perfectly tight. The front shock mounts on the bottom A-arms were relocated to accept 250r front shocks (already installed) which have much more travel and better overall action than banshee stockers. This would be an AWESOME rolling chassis to slap a streetbike or sled motor in. Or, since it's all still stock... put another banshee motor in and have a very nice banshee for under $1500. Prices as listed, or will sell the entire project for $1650. If you need pictures or have questions about anything just let me know! I may also be interested in trading the complete project (everything minus the pistons) for another running quad or bike... let me know what ya got! Quote
broke Posted May 30, 2005 Report Posted May 30, 2005 I am very interested in this, could you send some pics to [email protected]. Quote
Yaxy Posted May 30, 2005 Report Posted May 30, 2005 Are you willing to part out the bottom end? I am interested in the cases. Chris Quote
holeshot2 Posted June 1, 2005 Report Posted June 1, 2005 Picked up a 1990 Banshee in pieces that I'm parting out. This was a great running banshee before the previous owner took it apart and spent all the money on these brand new aftermarket parts only to loose his job before he could get it all back together. Here's what I have... 1) Trinity Racing Stage IV 2 into 1 complete setup - $275 This is just about BRAND NEW, in excellent shape, and ready to bolt on and go! Includes manifold, carb, carb to manifold boot, thumb throttle w/cable, and reed block w/reeds. The manifold and carb alone are selling for almost $500 on trinity's website. 2) Bills Pipes chrome pipes w/ silencers - $300 Again, pipes are just about BRAND NEW! No rust no dents barely even a scratch... in excellent shape and ready to bolt on. Silencers don't have any name on them but sound great, definitely aftermarket of some kind. Together these would retail for around $600 for the set. 3) Bottom end - $400 Comes with an almost BRAND NEW Wiseco Hot Rod crank and connecting rods. Crank and rods are PERFECT! Transmission is mint, clutch is good, all other gears are in good condition, side covers are perfect and very shiny. May be missing a few odds and ends, but price reflects that. NEEDS TO BE ASSEMBLED! This bottom end is in pieces, but you get everything I have including kick starter. Crank alone retails for over $500, and it's just about brand new. Add $100 for the cases, $75-100 for the transmission, $75 for the clutch assembly, and another $50 for misc parts and this is a squeal of a deal. 4) Cylinders w/head - $225 Fresh .050 bore. I don't have the equipment to verify .050 but they're definitely clean and ready to run. Cylinders are mint, head is good... both ready to go. Fresh black paint on the cylinders and head is very shiny and makes everything look brand new. 5) 1990 Complete Banshee rolling frame - $750 Chassis is just about spotless. It has some kind of tough blue paint on it that looks really good. Everything was coated correctly while the quad was apart and hasn't even been ridden on. Comes with: +2 axle DG alloy nerfs DG alloy front bumper Brand new black Maier plastics (older style) ITP rear rims with spider treks on back and holeshots on front Renthal bars Tether kill switch Ceet seat cover (the classic blue and white tiger stripe!) Aluminum rear grab bar 250r front shock setup Also comes with an excellent condition 250r rear shock to replace the stock banshee rear (worth an easy $150 alone!) Every bearing and bushing in the frame is brand new and perfectly tight. The front shock mounts on the bottom A-arms were relocated to accept 250r front shocks (already installed) which have much more travel and better overall action than banshee stockers. This would be an AWESOME rolling chassis to slap a streetbike or sled motor in. Or, since it's all still stock... put another banshee motor in and have a very nice banshee for under $1500. Prices as listed, or will sell the entire project for $1650. If you need pictures or have questions about anything just let me know! I may also be interested in trading the complete project (everything minus the pistons) for another running quad or bike... let me know what ya got! 375345[/snapback] i am also intrested.please call 913-207-0322 Quote
biodave27 Posted June 5, 2005 Report Posted June 5, 2005 Do you still have this? Does the bottom end come with the flywheel and the stator? Quote
broke Posted June 5, 2005 Report Posted June 5, 2005 Do you still have this? Does the bottom end come with the flywheel and the stator? 377924[/snapback] Has anyone heard back from him at all? Quote
quadridermx Posted June 9, 2005 Author Report Posted June 9, 2005 Sorry guys! I wasn't getting any notification that I had any replies to the post. To answer your questions... I do still have everything, and the bottom end does come with the flywheel and stator. Sorry, can't part out the bottom end. However if someone bought the entire thing, they could make some decent money by parting it out. The $500 crank only has one ride on it! Broke, pics are sending right now... Holeshot, I'll give ya a call tomorrow. Again, sorry bout the slow reply! From now on, please email me instead of replying here. [email protected] Has anyone heard back from him at all? 378008[/snapback] Quote
quadridermx Posted June 9, 2005 Author Report Posted June 9, 2005 Here are pics of everything! 2 into 1 system, DOES come with the slide and cable but it's not pictured Bill's pipes, DOES come with silencers but they're not pictured Bottom end with wiseco crank setup Cylinders w/head... these are ported. The guy I bought it from said they absolutely fly. Rolling Chassis... it's just loosely bolted together and there are a lot of parts *not shown in the pictures* but I do have everything else that's not shown in separate boxes . Quote
quadridermx Posted June 10, 2005 Author Report Posted June 10, 2005 Everything must go!!! 1) Trinity 2 into 1 setup - $225 2) Bills pipes and silencers - $250 3) Bottom end - $375 The crank alone was over $500 and only run once! 4) Cylinders - $175 5) Rolling chassis - $725 These prices are competitive, if not better, than what you'd find on Ebay. Please help out a po' college boy! Quote
quadridermx Posted June 14, 2005 Author Report Posted June 14, 2005 Cylinders, Bill's pipes, and 2 into 1 setup are sold... I do still have the: Bottom end Rolling chassis Dynoport 2 into 1 complete system with silencer for $175 Quote
bansheefan17 Posted June 14, 2005 Report Posted June 14, 2005 what comes wit tha rollin chassis ???? Quote
bansheefan17 Posted June 14, 2005 Report Posted June 14, 2005 NM just saw tha pics how much shipped to ashford WA 98304 Quote
quadridermx Posted June 17, 2005 Author Report Posted June 17, 2005 I'm not really sure what shipping would be. I'm willing to ship, but it's up to the buyer to figure out the details, I just don't have the time. Quote
1BADBANSHEE Posted June 19, 2005 Report Posted June 19, 2005 Here are pics of everything! 2 into 1 system, DOES come with the slide and cable but it's not pictured Bill's pipes, DOES come with silencers but they're not pictured Bottom end with wiseco crank setup Cylinders w/head... these are ported. The guy I bought it from said they absolutely fly. Rolling Chassis... it's just loosely bolted together and there are a lot of parts *not shown in the pictures* but I do have everything else that's not shown in separate boxes . 379557[/snapback] Was this quad on ebay a couple weeks back? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.