Rare Scottish Tree Badger Posted May 23, 2005 Report Share Posted May 23, 2005 I'm on a rebuild just now, and bought an RZ bottom end for bits and pieces. Mainly for the crank and clutch forks, but there's a few other parts worth keeping aswell. I was stripping down the RZ clutch and noticed these rubber rings that lay inside the clutch fibres. I didn't remember seeing these while stripping down my Banshee clutch (for the first time), so went to check. ... Nope, no cushion rings. Looked in the Clymer, and sure enough, they're supposed to be there. Anyone else removed them? And if so, why? ... I certainly haven't had any problems with my clutch, either in performance or noise. Rare. Quote Link to comment Share on other sites More sharing options...
neilgf Posted May 23, 2005 Report Share Posted May 23, 2005 There only there to stop clutch chatter Hope this helps P.s. Hows the rebuild going? Quote Link to comment Share on other sites More sharing options...
Oilsmoke Posted May 23, 2005 Report Share Posted May 23, 2005 K&T Performance, PassionRe And most people Hear don't run them. take them out and Never look back. Quote Link to comment Share on other sites More sharing options...
Rare Scottish Tree Badger Posted May 23, 2005 Author Report Share Posted May 23, 2005 Thanks guys, I'll just leave them out when it all goes back together. Neil, ... Barrels, head, and new pistons should be back on Wed/ Thurs. So hopefully have her all back together for the w/e. Rare. Quote Link to comment Share on other sites More sharing options...
neilgf Posted May 23, 2005 Report Share Posted May 23, 2005 Cool. Hope its all up and runnong for the next round at Duns Quote Link to comment Share on other sites More sharing options...
Nighty Posted May 23, 2005 Report Share Posted May 23, 2005 hehe, yeah beat Tithead for me or drive him off the track whichever suits you better No hard feelings titty, but banshees first. Quote Link to comment Share on other sites More sharing options...
Rare Scottish Tree Badger Posted May 23, 2005 Author Report Share Posted May 23, 2005 hehe, yeah beat Tithead for me 372920[/snapback] Shouldn't be too difficult. ... He's got a flat tyre and a missfire. Still got that helmet peak, Neil? Will you be at Duns? Rare. Quote Link to comment Share on other sites More sharing options...
neilgf Posted May 23, 2005 Report Share Posted May 23, 2005 Yeah David i'll bring it for you Quote Link to comment Share on other sites More sharing options...
Rare Scottish Tree Badger Posted May 24, 2005 Author Report Share Posted May 24, 2005 Yeah David i'll bring it for you 372951[/snapback] Cheers! Rare. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.