Quick, Easy, Cheap Mod

[quad4me]

I don't really think nerfs are needed for my riding...and didnt like the stock peg size. Also didn't wanna pay like $200 for the double wides. Here is the easiest and fastest way to get the double wide pegs.

 

you don't have to weld them...the bolts were sufficient..but why not?

 

not quite done yet...gonna paint them up so no rustnig occurs.

 

Cost:

$25 for stock pegs from HQ member Gargamel

$4 for the nuts and bolts I wanted to use.

$10 for my buddies welding skills....gotta tip a good worker!

Edited April 27, 2005 by quad4me

[sandman121383]

nice! haha i should give that a try

[locogato11283]

ive prolly done that to 4 sets of pegs now. i dont mess with bolts tho i just weld them up. its a good mod for ppl who dont wanna spend a ton of money..

[The Rebel]

Nice welds. good mod.+1

[kenr74]

I just bolted a set together since I can't weld. Great mod for $10.

[Wallrat]

It looks a little cleaner if you cut the added peg at a bevel where it comes in contact with the peg mount. Hard to describe exactly.

Take a look at the inside of the rear peg:

Edited April 27, 2005 by Wallrat

[NEVER SATISFIED]

the teeth on my pegs are worn the fk out!!! got any tips for that?

[quad4me]

the teeth on my pegs are worn the fk out!!! got any tips for that?

360935[/snapback]

dremel / grind in some more. just grind down a little between spikes. OR>>>BUY NEW ONES. This guy on here makes you some PHAT aluminum ones for $80. search for pegs...you'll see it.

 

 

It looks a little cleaner if you cut the added peg at a bevel where it comes in contact with the peg mount. Hard to describe exactly.

Take a look at the inside of the rear peg:

Edited April 27, 2005 by quad4me