justinklumb29 Posted April 18, 2005 Report Posted April 18, 2005 I got all of the studs that hold the cases together out fine, but i can't get the cylinder studs out. Is there any tricks or anything. Quote
cam2 Posted April 19, 2005 Report Posted April 19, 2005 I got all of the studs that hold the cases together out fine, but i can't get the cylinder studs out. Is there any tricks or anything. 357095[/snapback] the best way that i have found to do this is to put two nuts on a stud and snug them up so they don't spin off, then you put a wrench on the bottom nut and turn it counter clockwise and the stud should come right out easily then put a wrench on each nut and break them loose then go to the next stud. you may want to use some type of anti-sieze lube on the studs such as liquid wrench or PB blaster, this would help prevent breaking off a stud. good luck. Quote
Oilsmoke Posted April 19, 2005 Report Posted April 19, 2005 I got all of the studs that hold the cases together out fine, but i can't get the cylinder studs out. Is there any tricks or anything. 357095[/snapback] I double nut them to remove them. Quote
89Steeda Posted April 19, 2005 Report Posted April 19, 2005 Heat is your friend when it comes to removing studs. Quote
justinklumb29 Posted April 19, 2005 Author Report Posted April 19, 2005 I tired the nut thing and one of the studs broke off. Do i just drill it out, or how do i get the rest of it out now Quote
bbluebanshee Posted April 19, 2005 Report Posted April 19, 2005 drill a hole in it and use an easy out. But heat the hell out of it first Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.