2001SSTBanshee Posted April 14, 2005 Report Share Posted April 14, 2005 Im selling the A Arms off my 04 YFZ. They are in very nice condition. I ran about 2 tanks of gas through my bike, then I set it up for MX. You get: all 4 arms and the tie rods You will need the "dust caps" (on the arms) and the tie rod ends. Both these parts are the same on both the YFZ and Banshee, so you can use the ones on your bike now, and have everything you need. $180 shipped. - Shawn Quote Link to comment Share on other sites More sharing options...
sanddragon2004 Posted April 14, 2005 Report Share Posted April 14, 2005 Im selling the A Arms off my 04 YFZ.They are in very nice condition. I ran about 2 tanks of gas through my bike, then I set it up for MX. You get: all 4 arms and the tie rods You will need the "dust caps" (on the arms) and the tie rod ends. Both these parts are the same on both the YFZ and Banshee, so you can use the ones on your bike now, and have everything you need. $180 shipped. - Shawn 355060[/snapback] dust caps work arms will not on a banshee. Quote Link to comment Share on other sites More sharing options...
bigboybanshee Posted April 14, 2005 Report Share Posted April 14, 2005 dust caps work arms will not on a banshee. 355074[/snapback] It takes some fabrication but the 450 arms can be used on a banshee. A guy on here (I think it was svtjames or something) did it to his, looked tight as hell Quote Link to comment Share on other sites More sharing options...
sanddragon2004 Posted April 14, 2005 Report Share Posted April 14, 2005 It takes some fabrication but the 450 arms can be used on a banshee. A guy on here (I think it was svtjames or something) did it to his, looked tight as hell 355125[/snapback] how much fabricating? you would also have to use yfz shocks? seems like alot more trouble then its worth? although i must say, that a set of yfz shocks really makes a banshee handle like a dream compared to the garbage shocks they come with! I would be real curios to see how well they fit. and how they look when done. does it radically change the steering geometry? does it mess with the bump steer? i bet it looks bad ass. Quote Link to comment Share on other sites More sharing options...
bigboybanshee Posted April 14, 2005 Report Share Posted April 14, 2005 Not sure how much fabricating it takes but here's the thread with pics of it...his name is svtjames and his post is about halfway down. I think it looks badass http://www.bansheehq.com/forums/index.php?...ic=29803&st=120 Don't mean to hijack your post SSTbanshee, figured this might help sell them Quote Link to comment Share on other sites More sharing options...
triple B Posted April 16, 2005 Report Share Posted April 16, 2005 iv'e got a magura hyd clutch i would trade for the arms if intrest pm me Quote Link to comment Share on other sites More sharing options...
Long Rod Todd Posted April 16, 2005 Report Share Posted April 16, 2005 (edited) Here is a pic if i'm doing this right Edited April 23, 2005 by Long Rod Todd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.