SDD Posted March 8, 2005 Report Posted March 8, 2005 Here is the cubs http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMESE%3AIT Who's going to buy? Quote
kenr74 Posted March 8, 2005 Report Posted March 8, 2005 Trick has been selling them for a couple weeks now. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...sspagename=WDVW $100 cheaper too. Of course I wouldn't buy anything from those guys but anyway.......... Quote
420 RACING Posted March 8, 2005 Report Posted March 8, 2005 Contact Dan at A&S he was part in designing those cylinder setups. He had a shit load of them when I was at his shop a few weeks ago Quote
. Posted March 8, 2005 Report Posted March 8, 2005 holy opened up intakes.....how are those things gonna pull on the low end? Quote
SDD Posted March 9, 2005 Author Report Posted March 9, 2005 Contact Dan at A&S he was part in designing those cylinder setups. He had a shit load of them when I was at his shop a few weeks ago 335556[/snapback] Dan may have had some behind the scenes part in the design but there were a few others that had more input than Dan. Quote
broke Posted March 9, 2005 Report Posted March 9, 2005 holy opened up intakes.....how are those things gonna pull on the low end? 335672[/snapback] I don't think the port play out on these was ever meant to be a good trail monster. I'm sure anything can be ridden, but I "heard" these things have exhaust timing geared a little more toward top end. Either way they are incredible, Calvin has out done himself again. But, this time for a reasonable amount. Quote
dlnoss Posted March 9, 2005 Report Posted March 9, 2005 Nate McCoy (more-torque on Ebay) seems like a pretty good and knowledgeable guy. I had some dealings with him. Quote
FORMULASPEED Posted March 11, 2005 Report Posted March 11, 2005 so is there some other dynos on these besides A&S sheets. Quote
SDD Posted March 11, 2005 Author Report Posted March 11, 2005 so is there some other dynos on these besides A&S sheets. 337219[/snapback] I'm not sure yet. I know Ohton was going to dyno his sets, More Torque will be dynoing his 7mm sometime next week if all goes to plan. Trinity who knows. Trick no idea but they are or will be introuble for listing the cubs for less than 875. Southern style I don't know if they will be dynoing anything close to stock... there are a ton of shops that have these cylinders. I guess I should say this... just because on builder can get 5-10 hp more than another doesn't mean you will be faster than someone else with the same motor from another builder. Being able to put all the power to the ground is what will win the race in most cases. I know... blaa blaa you guys already know this.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.