Bansheeman1121 Posted March 8, 2005 Report Posted March 8, 2005 I took my cylinders up finaly to get the bored. they said they cant bore them without ordering pistons so im getting them bored .80 over and wiesco .80 overs for 320 including gaskets wristpins and all the boring and cleaning the ports up. Is this a good or bad price?? Quote
rocketboy Posted March 8, 2005 Report Posted March 8, 2005 I took my cylinders up finaly to get the bored. they said they cant bore them without ordering pistons so im getting them bored .80 over and wiesco .80 overs for 320 including gaskets wristpins and all the boring and cleaning the ports up. Is this a good or bad price?? 335216[/snapback] i wouldnt pay more than 145$ total for a whole.080 topend kit(includes everything you mention and more ),i would also not pay more than 40 $ per cylinder to have them bored and honed,thats 225$ save yourself some $$$$ friend Quote
BdBanshee Posted March 8, 2005 Report Posted March 8, 2005 Don't bore out to .080" over unless you need to. You won't feel the difference between .020" over, and .080" over, but you will lose several bore sizes that you might need! So if you are on stock bore now, have them order .020" over pistons. Quote
locogato11283 Posted March 8, 2005 Report Posted March 8, 2005 thats nuts. you gettin shafted. 145 maybe 150 for the pistons and at the highest 40 per cylinder for boring. what bore are your cylinders on now? dont og more than you need to. Quote
y2kbanshee9187 Posted March 8, 2005 Report Posted March 8, 2005 Don't bore out to .080" over unless you need to. You won't feel the difference between .020" over, and .080" over, but you will lose several bore sizes that you might need! So if you are on stock bore now, have them order .020" over pistons. 335282[/snapback] Word! Quote
Bansheeman1121 Posted March 8, 2005 Author Report Posted March 8, 2005 Mine are on 60 now but the scores were pretty eep so they need to go to .80 i didnt like thw sound of it either, also the place wouldnt do it without pistons so i just told them to order it and .80 over somehow came out to 220 with wristpins and gaskets Quote
rocketboy Posted March 8, 2005 Report Posted March 8, 2005 somehow came out to 220 with wristpins and gaskets 335816[/snapback] sounds like they "somehow penetrated your rectum " Quote
FORMULASPEED Posted March 8, 2005 Report Posted March 8, 2005 $40 a hole! must be nice, you aint touchin less than $60 a hole around here. If you do your buyin a new top end before your 1st tank is gone. Quote
Brian060 Posted March 9, 2005 Report Posted March 9, 2005 sounds like they "somehow penetrated your rectum " 335827[/snapback] Quote
BdBanshee Posted March 9, 2005 Report Posted March 9, 2005 I ordered a set of Wiseco Pro-lites a couple of weeks ago for the wifes Banshee from Rocky Mountain, $64.99 apiece for piston, rings, and wrist pin. Quote
GYTWYPT Posted March 9, 2005 Report Posted March 9, 2005 sounds like they "somehow penetrated your rectum " 335827[/snapback] Hope they are throwin in a rim job with that Quote
01bansheeke Posted March 9, 2005 Report Posted March 9, 2005 i spent a bill 25 on pistons shipped with bearings etc...the 30 bucks a hole to bore.i was out for right at 200. THEY WILL bore them if YOU order the pistons. i believe the tolerances are supposed to be 3-5 thousandths. Get the pistons, bring them to them. Then they can bore the cylinders. the place i had myne done wanted me to bring myne in when they did it. no big deal. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.