BrianEb Posted February 3, 2005 Report Posted February 3, 2005 I'm thinking about upgrading my a-arms to Janssen or ATV Four Play Just wondering if they are made of good quality In a perfect world I would prefer the Roll Design Lobo II ARMS or So.-Cal Fabs A-Arms but for $3,200 and up, I think I would rather spen only about $2,200 and save a grand Quote
ledofthezep Posted February 3, 2005 Report Posted February 3, 2005 I've never heard anything bad about them. See their arms on a lot of pro-caliber bikes...if you got the money go for it! Quote
1sreamin350 Posted February 5, 2005 Report Posted February 5, 2005 (edited) Im trying to install their LT kit right now and it is a pain in the ass to get it aligned right. Called them up the other day to tell them that the tie rods were not the right thread pattern as my bolts "was not going on for nothing" and the tech tried to tell me it was supposed to be like that. After pissin and monin for awhile he finally sent me the right ones the very next day. Anyways I just sent them an email on why they dont have one single instruction on how to install this kit. From what I have experienced sofar I wish I would have gone with some other company. Edited February 5, 2005 by 1sreamin350 Quote
locogato11283 Posted February 5, 2005 Report Posted February 5, 2005 i run their steering stem and its sweet Quote
JARE77 Posted February 5, 2005 Report Posted February 5, 2005 I have met quite a few guys here in Canada that run Janssen A-arms,and swingers. Looks top notch Quote
broke Posted February 5, 2005 Report Posted February 5, 2005 Their products are great, the people that answer their phones are not. I have never had one issue with my A-arms, but trying to order some small hardware turned into a saga, and I never got any of it. Quote
RNBRAD Posted February 5, 2005 Report Posted February 5, 2005 Im trying to install their LT kit right now and it is a pain in the ass to get it aligned right. Called them up the other day to tell them that the tie rods were not the right thread pattern as my bolts "was not going of for nothing" and the tech tried to tell me it was supposed to be like that. After pissin and monin for awhile he finally sent me the right ones the very next day. Anyways I just sent them an email on why they dont have one single instruction on how to install this kit. From what I have experienced sofar I wish I would have gone with some other company. 317761[/snapback] Check around on the net, I think Doug Gust has some info on setting up a-arms on his web site. They can definitely be a pain in the ass to install if you didn't read any information on setting them up prior to installation. They aren't just a bolt on and go products. All a-arms are this way not just LT arms. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.