Quinlan Posted January 1, 2005 Report Posted January 1, 2005 I have the opportunity to buy the wiring harness, cyls, servos, head....all things except power valves to swap mine to RZ. What I need to know is where can i go to find info about the swap, and the wiring part of it. Also, Is it possiable to block the power valve holes off in them to run em as normal banshee cyls? ANY help is VERY appreciated..... Thx Quote
trigg Posted January 2, 2005 Report Posted January 2, 2005 I have the opportunity to buy the wiring harness, cyls, servos, head....all things except power valves to swap mine to RZ. What I need to know is where can i go to find info about the swap, and the wiring part of it.Also, Is it possiable to block the power valve holes off in them to run em as normal banshee cyls? ANY help is VERY appreciated..... Thx 300639[/snapback] try doing a search on here for the wiring diagrams if you can't find them i may have put them on disc some where. some people just cut out what they did not need in the rz loom but i made my own race loom with a battery elimnator in. this way it keeps down anything that may go wrong in the system. in my last rebuild that i have just finished i re built the loom well i made about 4 seperate looms so i can trace faults if need be quicker as for blockin them off i tried on my first engine but it was the best i used a couple of stainless inserts . you could just leave the valves in and set them where it's best for your type of riding. jiff Quote
Quinlan Posted January 2, 2005 Author Report Posted January 2, 2005 Thx Man, If ya can find them diagrams I'd be greatly appreciative I did a search, I have seen the diagrams your talking about, but I don't see them on here anymore . I don't run lights or anything other than I what absolutly need. Thanks again Any other info is gretaly appreciated Quinlan Quote
Fasttoy Posted January 4, 2005 Report Posted January 4, 2005 Hey if you got a chance to get those cyls you had better grab them the price maybe only a few hundred ..?????maybe i will buy them,,,let me know ... Quote
cory vogrinec Posted January 6, 2005 Report Posted January 6, 2005 Hey if you got a chance to get those cyls you had better grab them the price maybe only a few hundred ..?????maybe i will buy them,,,let me know ... 302038[/snapback] Don't know if this would help, but I have my Yamaha factory RZ-350 manual with wiring diagrams. If you would like a copy, I'll scan one and e-mail it to you???? Quote
Quinlan Posted January 6, 2005 Author Report Posted January 6, 2005 Fasttoy, Yeah I figure i'll get them for about $100 or so, I'll resell them to ya for about $900 plus shipping which will be about another 2-300. The Ford is hard on fuel and your like 10 mins away so.. About time I found what you go by on here. Thx Cory , you have a PM Quote
bogart Posted January 7, 2005 Report Posted January 7, 2005 i got a rz350 manual also i can see if i can scan the p about to do another rz swwap.my complete ported rz motor just came today.i already have one done and man does it make a diffrence.i just gotta mill the head more on both for 170 psi about. Quote
broke Posted January 8, 2005 Report Posted January 8, 2005 i got a rz350 manual also i can see if i can scan the p about to do another rz swwap.my complete ported rz motor just came today.i already have one done and man does it make a diffrence.i just gotta mill the head more on both for 170 psi about. 303395[/snapback] I've got one stock stroke ported RZ motor, and a stroker that in the process of a very slow build. I agree it makes a huge difference. Up until I bought another stocker I forgot just more shitty the Banshee bottom end is. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.