locogato11283 Posted December 18, 2004 Report Posted December 18, 2004 well we went down today and had our bikes dynoed. i was gonna dyno my bike with my rockets versus cpis but my builder decided to be cool and not show up and bring the cpis. so all you are gonna get is my results with the rockets. plus at 100 bucks an hour on this thing i didnt wanna do too much dickin around. when i first got there i pulled 65 max hp. when i left i was pulling 76 hp. had to adjust the jetting several times. i was way too rich. also, i would really love to put the dyno sheet up here for you but its so fuckin shitty looking you cant even read it. i dont even know what my torque was, because i dont remember and also cuz i cant read it on this fuckin sheet. next time i will dyno my bike with cpis on it but ill have to get them from my builder first. also, if anyone lives near me and wants to run on this dyno its 400 bucks a day(8 hours), or 100 an hour to tune. so if anyone ever wants to do this let me know. there can be as many people there running as many times as they want. Quote
stclark816 Posted December 18, 2004 Report Posted December 18, 2004 The good ol' Eric Gorr woods port pulled a 57.5.... Not bad for a cheap port job. Quote
banshee04le Posted December 18, 2004 Report Posted December 18, 2004 No ceep's comparison? Your builder what huh? Quote
bansheefreak Posted December 18, 2004 Report Posted December 18, 2004 sounds good .. loco you have gorr porting too????? but also it looks like you don't know how to jet since it was fat when you got there ...lol maybe you and bro should just get a dyno set up in your shop so you can dyno anytime.... but really for it being fat it has decent numbers plus after you played with jetting a bit it got even better.... Quote
locogato11283 Posted December 18, 2004 Author Report Posted December 18, 2004 i dont have gorr porting. mine was done by a local builder. and as for having my own dyno, i wish. the guy that owned this one said it cost like 20 grand. thats fuckin unreal. as for the jetting, it wasnt too far off. i hadnt done much with it since i got it back together, so i was pretty happy with it. overall id say im happy with the numbers. cant wait to get the cr500 banshee on the dyno Quote
BenBB Posted December 18, 2004 Report Posted December 18, 2004 76hp nice...11hp dialing in the jetting, priceless Quote
RNBRAD Posted December 18, 2004 Report Posted December 18, 2004 Thats some pretty kickazz numbers for sure. I may get mine on the dyno before long since a guy in my town has one. Quote
banshee76179 Posted December 18, 2004 Report Posted December 18, 2004 Just think what U could of gotten with another hour!!! Quote
locogato11283 Posted December 18, 2004 Author Report Posted December 18, 2004 76hp nice...11hp dialing in the jetting, priceless 294834[/snapback] haha yea. my brothers was deamn dear dead on. i think he changed the needle and gaines 2 hp. his was really close before we even put it on the machine. what i liked about dynoing there was that it was the same temp inside as outside, not 80 inside and 40 outside. so i feel better about jetting it on the dyno. next step is to get it on there with some cpis to compare them to my rockets. its just so fuckin expensive to tune on the dyno and id be tuning a set of pipes on my bike i dont even run... Quote
Cotton eyed Joe Posted December 18, 2004 Report Posted December 18, 2004 First off, like Ben I'm impressed you pulled another 11 HP out that!!! Worth the money to dyno if you ask me. How much $$ in mods would you need to gain 11HP?? There ain't a dyno for an atv anywhere near me. Lots of car and diesel tractor dynos, but nothing that will work on my banshee.... Quote
2004LEBanshee Posted December 18, 2004 Report Posted December 18, 2004 How does it run compared to the 450? Quote
tats4life Posted December 18, 2004 Report Posted December 18, 2004 nice numbers.. @ what rpm did it start to make the power. Quote
01bansheeke Posted December 18, 2004 Report Posted December 18, 2004 I'd be interested in runnin on the dyno this spring. I'll let you guys know when i'm ready. Probably won't be ready until the cheetah cylinders get here..but i'd be happy to plop down some change to spend some time on the ol dyno. Does your builder happen to know anything about porting the cheetah cylinders?? pm me or i'll just talk to you about it later. Quote
locogato11283 Posted December 18, 2004 Author Report Posted December 18, 2004 01banshee, this guy can build whatever you want. hes got some insane bikes. turbo banshee, triple cylinder sled engine in one, and some other huuuge ass bikes. www.gtperformanceatv.com check him out. tats, i was pretty happy. my builder said with cpis and different domes im waitin on itll make 80hp. im not too concerned but i will eventually be testing the cpis on it. sometime next week i think. 2004le, there is no comparison. stan, surprised me too. had to do a little adjusting today tho. still a little leary of jetting on a dyno. i like to get out and ride it and get it warm and shit. you cant do that with the dyno tuning. Quote
sredish Posted December 19, 2004 Report Posted December 19, 2004 nice.... glad to hear how good it worked out. we have a local dyno that will charge $20 for and "undetermined" number of runs, basically, for a couple hours worth of running. Cheap cheap. That's awesome Tyler, bet it runs like a freak!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.