adrenilinjunki Posted November 9, 2004 Report Posted November 9, 2004 has any one crhomed the frame on there shee if so how much that run and how does it hold up Quote
stclark04 Posted November 9, 2004 Report Posted November 9, 2004 I would of liked to. But there is no way in hell I could afford it. Quote
decon Posted November 9, 2004 Report Posted November 9, 2004 i seen a gold plated banshee on the web, must of cost a fortune. here is a pic of it. Quote
99screaminshee Posted November 9, 2004 Report Posted November 9, 2004 wonder what funk master flex would think about that thing "its blingin" uh oh the redneck in me is kickin in time to go Quote
NYUK Posted November 9, 2004 Report Posted November 9, 2004 you would need to seal up every hole in your frame by welding them shut.i seen a frame come out like shit .it also weakens it.hydrogen embrittlement occurs under the plating. Quote
DUNEDEMON Posted November 9, 2004 Report Posted November 9, 2004 it also weakens it.hydrogen embrittlement occurs 278761[/snapback] Bingo Quote
racer Posted November 10, 2004 Report Posted November 10, 2004 it also weakens it.hydrogen embrittlement occurs 278761[/snapback] Bingo 278821[/snapback] that sucks about the embrittlement. isnt there a way around it? Quote
RNBRAD Posted November 10, 2004 Report Posted November 10, 2004 Well a good possibility is polishing the frame and the doing a clear PC. As for noticing that the chrome has weakened the frame, I doubt you could even measure it. Quote
frocashmoney24 Posted November 10, 2004 Report Posted November 10, 2004 hey dunedemon arent you the one that did the powder chrome? Quote
DUNEDEMON Posted November 10, 2004 Report Posted November 10, 2004 Yes sir, have not done a frame yet. Quote
locogato11283 Posted November 11, 2004 Report Posted November 11, 2004 that banshee is fuggin sick made. wonder how much he has into it? Quote
370banshee Posted November 30, 2004 Report Posted November 30, 2004 that banshee is fuggin sick made. wonder how much he has into it? 279400[/snapback] too much Quote
rocketman28 Posted November 30, 2004 Report Posted November 30, 2004 I wanted to chrome mine but came to this conclusion, ill spend 200 hour polishing and buffing to get it like a mirror only to have either the chrome shop have a dirty tank and id have to polish it again or 3 months after its done it starts to rust where the chrome couldnt get to, if dune demon can make my frame look like it was chromed ill ship it, and throw in a new set of rockets to knock down the cost, every part for my new rebuild is highly polished or chromed, it makes me sick to think i have to have my frame powder coated but not if it will look chrome! Quote
DUNEDEMON Posted November 30, 2004 Report Posted November 30, 2004 I should know more about Powder Chroming frames here in the near future....stay tuned. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.