My New Reeds

[siezed-up]

I added a couple of ports to these stock cages

 

[NYUK]

1st time i ever seen that, let us know how they work.

[broke]

That looks good, similiar to Pyramids. Definately give a review on those.

[rebelbanshee2]

hmm interesting....not sure how well itll work since they are nearly parrallel to the flow

[racer]

i thought about that once before, but never tried it. hope it works for ya though.

[SDD]

The reason those won't work is the sides of the cages are pretty close to the sides of the intake port. If your make shift reed touches the walls of the intake port they will start falling apart rapidly. Good luck dude

[siezed-up]

If your make shift reed touches the walls of the intake port they will start falling apart rapidly.

There's enough room after I ported my cylinders that they won't touch. I was wondering about the fact that they are flat facing the cylinder though, not sure how well they would seal. I wanted to throw them in, make a couple of passes and pull them to see if there was any wear or blow by. I figured I would post what I did on here first to see how many people would slam me on them.

[DUNEDEMON]

There is an interesting post at Planet Sand (dyno section) about reeds / cages, you should take a look.