frocashmoney24 Posted October 10, 2004 Report Share Posted October 10, 2004 well if i cant sell my shee as a whole i might peice it out in a few weeks if i get enough people interested in some of the bigger parts so heres a list, leave a price and the part if you would be interested, thanks and remember, this is aftermarket, ill still have the cases, bottom end, things like radiator and such to. Engine Fresh rebuild top and bottom Fresh EBC clutch New stock clutch basket Pro Design fully adj. Timing plate (set at +5 right now) Weisco hot rods and crank Fresh Weisco .80 Prolight pistons Brand new Noss coolhead with 21cc domes 33mm Pwk Keihn carb, with Trinity stage 4 , 2-1 intake system Single K&N filter with outerwear, with Prodesign plate for 2-1 system TDR epoxy reeds Procircut Platinum pipes and silencers Mild MX port and polish NGK plug wires and caps Inline fuel filter Inline water cooler Jetted accordingly. Boltons DG nerfbars with new nets DG bumper New DG grab bar Billet parking brake block-off Epoxy case saver Race full engine skidplate Locknut Axle nut Epoxy chain sliders and roller Chrome and Polished Chrome Grill Chrome Gas cap Chrome Water Pump insert Chrome Clutch cover instert Chrome Flamehead dipstick Chrome rear brake ressy cover Polished front brake lever Polished rear brake lever Polished Shift lever Polished Kick starter Controls Renthal Fat bars UFO hand guards RTC clutch pertch and lever Prodesign Kill switch Moose grips MotionPro Twist throttle Looks New Front plastics, tank cover and rad. Cover With Alba flame graphics Ceet Seat cover Newer stock rear plastics with Ceet graphics and race sticker kit Painted Stock swingarm gloss black Painted bearing carrier Gloss red Painted hubs Gloss red Painted Sprocket carrier and brake rotor Gloss red Red moose shock covers all the way around Renthal red cross bar pad Custom Water temp. guage Footpegs welded to frame with kickups Rear fender Brackets Clear stator cover Rebuilt kick starter Run Wiring/Tubing Removed Lighting system Parking brake assembly Extra wiring/tubing Chassis/Tires 95 engine and frame boltons 91 frame with J-A-arm conversion Painted gloss black Armadillo +2+1 Racing A-Arms New front 20inch .190 ITP rims with 20inch Kendra Klaw MX tires Rear 8 inch .190 ITP 18inch Turf tamers MX tires Quote Link to comment Share on other sites More sharing options...
Banshee~ Posted October 10, 2004 Report Share Posted October 10, 2004 i might be intrested in the DG nerfbars...what color are the nets Quote Link to comment Share on other sites More sharing options...
Bansheeman1121 Posted October 10, 2004 Report Share Posted October 10, 2004 How loud are the silencers?? And that crank sounds nice Quote Link to comment Share on other sites More sharing options...
Noob Banshee Posted October 10, 2004 Report Share Posted October 10, 2004 I need a bumper. How much? Quote Link to comment Share on other sites More sharing options...
wickedfmx Posted October 10, 2004 Report Share Posted October 10, 2004 how much for complete engine?? Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted October 10, 2004 Report Share Posted October 10, 2004 Fro,I in need of some 8" rear rims and tires PM me a price. Quote Link to comment Share on other sites More sharing options...
Xowner Posted October 10, 2004 Report Share Posted October 10, 2004 i got dibs on block off and rtc clutch lever and perch Quote Link to comment Share on other sites More sharing options...
BansheeBoy17 Posted October 10, 2004 Report Share Posted October 10, 2004 (edited) Interested in : -front tires on rims -Rear plastics -2 into 1 carb setup Bansheeboy17 / Jim417 Edited October 10, 2004 by BansheeBoy17 Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted October 10, 2004 Author Report Share Posted October 10, 2004 the guy asking about my engine, pm me we'll talk about it, if i get the engine and some of the other big things sold, ill start piecein out in a week or 2, thanks, anyone else? ill get back to the rest of you about pieces if i get more parts sold Quote Link to comment Share on other sites More sharing options...
bansheeracer18 Posted October 11, 2004 Report Share Posted October 11, 2004 clear stator cover RTC clutch pertch and lever Inline water cooler Ceet Seat cover and seat assembly Race full engine skidplate 91 frame with J-A-arm conversion Painted gloss black e-mail me thr prices at perkins18@aol.com Quote Link to comment Share on other sites More sharing options...
sredish Posted October 11, 2004 Report Share Posted October 11, 2004 Billet Parking Brake blockoff Polished clutch insert Twist throttle setup (assuming it would work good for my 35 single setup ) Polished rear brake lever Temp Gauge (if it's easily swapped over) Quote Link to comment Share on other sites More sharing options...
2k4_Shee Posted October 11, 2004 Report Share Posted October 11, 2004 how much for the PC pipes? Quote Link to comment Share on other sites More sharing options...
Tony E Posted October 11, 2004 Report Share Posted October 11, 2004 Interested in the carb setup. How much for it all, the intake to the filter? Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted October 11, 2004 Author Report Share Posted October 11, 2004 damn, looks like alot of parts would be going quicker then i thought. still workin on a deal on the engine, then maybe ill tear into the rest Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted October 11, 2004 Report Share Posted October 11, 2004 If you do part it out save me your 8" rims and tires,and I'll take you klaw fronts with rims. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.