Adjusting the Tranny

[geaux 4 it]

It's hard to shift it on the table because the tranny isn't moving as fast .Look at the shift shaft & make sure it isn't bent.

[Oilsmoke]

Dude Use your tranny. Don't go to a Stealership. Remeber if you did it once you can do it agian ,If need be. ( teardown & rebiuld ) But i betting you will be ok,

 

My banshee was a old worn Dune machine when i bought it, That is why i think it trashed 2 gear.

I paid 2800 and then i added about 3200 to it. It's Solid Dune machine now.

 

It runs great but I am still tunning the 34 RS mikunis for full power. I won't push the jetting very fast so i ride and check plug and drop it every ride, I am at 290 main and looking like 270 to 280 it where it will end up.

 

Not sure about the washer rubber thing ? tell me more.

 

I ride at Siant Anthony Id.

 

I need to get some pics up .

[troyminator]

Very Cool Oilsmoke!

 

I am ride in Southern Cal/Arizona (Buttercup,Glamis,Gordons). As for the tear down and re-assembly (I would just hate to trash something else too:(

 

That is my bike before I started the tear down and rebuild at the top of a bowl at Buttercup. Like I said...I can't wait to get the new motor in...I am kinda worried about getting the jetting right, but I will play around with it slowly too

 

As for the washer thing... there is a link below to a previous post I read>>>

 

Later,

 

T

 

Shift Shaft Adjustment