A-arms And Works Shocks

[budlightshee]

i just installed some +2 arms and when i was installing my +2 works shock i noticed that they are almost rubbing on the upper a-arm, anyone else have this problem and if so what can i do.

[frocashmoney24]

if they aint touchin they should be allright

[OC-SHEE]

they will break in and move a lil just need to ride it. My problem is my rezzi hitting my top a-arm but i have piggybacks.

[MULLET~BOY]

what kinda aarms are they

[spoin39]

I have eyeball engineering arms, and they come very close, but never touch.

[budlightshee]

they are "ugly" a-arms

[.]

lol....go figure, they might be hitting the shock.....and it might not be fixable...... you should run and do this

 

Nah man, good luck, let us know how it goes. Dude selling the arms just keeps digging himself into more shit.....you should feel lucky you at least got to try to put them on your shee to see if they even work.

 

As long as they're not hitting, they should be alright, just keep an eye on it.

Edited May 4, 2004 by .

[MULLET~BOY]

i would send them back..... the geomtry is fucked up on thoes aarms but good luck with them

 

if you send them back check into some quicksand motorsport aarms

 

 

good luck

jethro

[MotulMonsta]

Do they have adjustable heim joints? try setting the aft ones in a bit and bring the front ones out, it will give you a bit more clearance...If you don't have adjustable upper A-arm heim joints..then your fucked as you won't be able to adjust the castor angle for the spindle.(Who came up with this terminology?)

Oh, you should also be able to A: adjust the res. sitting angle or B: add a shim to the side with the least amount of clearance.

Edited May 4, 2004 by MotulMonsta