Liftedbronco Posted April 12, 2004 Report Share Posted April 12, 2004 (edited) Whats my best bet to repair this. The mount is broken, though the resevoir and lever are fine. I cant weld it so i need to replace. I guess the best bet is to ebay a new assembly. Do any aftermarket companies make the resevoir/master cylender? Or is this a yamaha only kinda thing? Also, I bent my bar pretty bad. What kinda bar reccomendations do you all have? I saw a tag t2 setup for $200 with mounts...doesnt sound too worth it to me. I saw bars for around $60 that will fit stock mounts. Reccomendations on brand/size? Edited April 12, 2004 by Liftedbronco Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted April 12, 2004 Report Share Posted April 12, 2004 why cant you weld it? Any bar is beter then stock! Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted April 12, 2004 Report Share Posted April 12, 2004 (edited) What part of the mount is broken? The part that clamps or is it next to the resevoir? The tag bars are pretty sweet, if ya got the money. I haven't had any problems with my FLY bars, I like'm. Edited April 12, 2004 by ledofthezep Quote Link to comment Share on other sites More sharing options...
banshee tuner Posted April 12, 2004 Report Share Posted April 12, 2004 I'm sure handlebars are like every thing else you get what you pay for. I've got msr dominator aluminum bars and only spent $35. They are much better than stock in my opinion. I've even rolled and did not bend em but bent an a arm. Quote Link to comment Share on other sites More sharing options...
. Posted April 13, 2004 Report Share Posted April 13, 2004 If you plan on rolling it again, go get yourself some cheap 20 dollar bars, and dont tighten you controls tight, just tight enough that they dont move around on you. I'd much rather bend a set of 20 dollar bars than a steering stem and other parts. If you dont bend the bars, that stress is going somewhere else. Quote Link to comment Share on other sites More sharing options...
Liftedbronco Posted April 14, 2004 Author Report Share Posted April 14, 2004 Yea im not gonna go nuts on bars. i see that i like the tag x5. i was looking for brand.model/bend ideas. I definitley wanna get a lower position thats not so up and back like the stocks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.