CoopBanshee Posted April 12, 2004 Report Posted April 12, 2004 8500 RPM This is a stock banshee with t-6 pipes on it. http://www.toomey.com/image/ProCircuit_lg.jpg Quote
Aussie Quad Racer Posted April 12, 2004 Report Posted April 12, 2004 8500 RPM This is a stock banshee with t-6 pipes on it. http://www.toomey.com/image/ProCircuit_lg.jpg You jack a$$, thats just where they choped off the graph. and those hp levels are over done, or its a modded bike with those pipes. Mine ran up to 10,200 on the dyno and made 50 hp with alot more modes than just slaping a set of pro curcuits on Quote
CoopBanshee Posted April 13, 2004 Report Posted April 13, 2004 First of all, don't call me a jack @ss, you Australian *****et. You can rev an engine as high as you want to, but you wont be in the power band. After a certain point the power just drops off. Those dyno charts are from Toomey.com. Check them out for yourself. Finally, don't be pissed at me if your hunk of shit only makes 50 HP with all of those mods. Quote
banshee76179 Posted April 13, 2004 Report Posted April 13, 2004 Now we don't want this 1 to get out of hand... Go to ur netural corners... Quote
XTShee Posted April 13, 2004 Report Posted April 13, 2004 Finally, don't be pissed at me if your hunk of shit only makes 50 HP with all of those mods. Your forgetting to convert it to u.s terms 50hp Australian converts to around 146.5689hp US, sorry for the confusion Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.