Djj624 Posted May 30, 2025 Report Posted May 30, 2025 Was checking my idle out in the banshee because I thought it was a little low I have the tors delete kit and tried loosening the jam nut on the idle screws (the gold ones on the side) but noticed that the one was pretty much all the way in and the other one was all the way in at a quarter more of a turn. I'm not an expert but it seems that that shouldn't be. How could I reset these or get them to where they need to be? Sent from my SM-S911U using Tapatalk Quote
Djj624 Posted May 30, 2025 Author Report Posted May 30, 2025 Was checking my idle out in the banshee because I thought it was a little low I have the tors delete kit and tried loosening the jam nut on the idle screws (the gold ones on the side) but noticed that the one was pretty much all the way in and the other one was all the way in at a quarter more of a turn. I'm not an expert but it seems that that shouldn't be. How could I reset these or get them to where they need to be? Sent from my SM-S911U using Tapatalk Might I add the bike does run great. Just since the weather got warmer it seems like the idle is a little lower than it was when it was cold.. Sent from my SM-S911U using Tapatalk Quote
locogato11283 Posted May 30, 2025 Report Posted May 30, 2025 Just adjust it on the perch. I never use the carb idle. I set them to open the same and then adjust it up on the perch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.