Banshee spiked to full throttle

[Louis]

I painted the frame on my Yamaha banshee so I took everything apart, when I put it together I started it and it instantly sores to full throttle. It ran perfect before I took it apart I really doubt it’s a vacuum leak maybe I screwed up something with the wiring like a ground but I doubt that too. It’s also not the throttle slides their in the correct position and don’t get stuck. What should I check next?

[375hp banshees]

If your slides are all the way down, do a leak down test.

[hoppedupandcutdown]

forgetting the choke cross over hose can cause that.

[375hp banshees]

I wondered if that would...usually it wont start 2 find out

[Louis]

The slides weren’t adjusted properly that’s what caused the idle issue but now the quad kicks back at me hard when I try to start it. did I screw up the wiring? The timing is at 0 and the carbs are in sink so maybe it’s a ground causing this the only ground that I messed with is the one on the voltage regulator some help would be great.

[Louis]

On 2/4/2024 at 12:19 PM, 375hp banshees said:

I wondered if that would...usually it wont start 2 find out

Yeah it connected