caleb90 Posted December 1, 2020 Report Posted December 1, 2020 so im doing a build, getting ready to weld gusstes to the frame. now ive messured every way possible with out putting a robot romer arm on it. and best i can come up with depending where and how i measure. is the frame is between 1/16th to 1/4in square from front to rear sub frame.. normal or no? i dont want to dumo money in a twisted frame Quote
caleb90 Posted December 4, 2020 Author Report Posted December 4, 2020 here ya goSent from my SM-G920V using Tapatalk Quote
caleb90 Posted December 4, 2020 Author Report Posted December 4, 2020 these two measurments are from the wire bracket below steering hoop.Sent from my SM-G920V using Tapatalk Quote
SKEETER Posted December 4, 2020 Report Posted December 4, 2020 Being straight is overrated. Look at 375hp Quote
n2otoofast4u Posted December 4, 2020 Report Posted December 4, 2020 WELL within Yamaha spec! Id be most concerned with Center of axle, to center of ball joints Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.