lincster Posted December 13, 2003 Report Posted December 13, 2003 Do locking axle nuts really work? Should I buy a name brand or there is on one ebay for $35, brand new, some guy makes them. Do you still have to use locktite? Quote
Big Blue Posted December 13, 2003 Report Posted December 13, 2003 I dont see why it wouldnt but i would still use lock tite on the nut and the screws. Quote
astromybud Posted December 14, 2003 Report Posted December 14, 2003 I have an older RAD nut. It is a single squeeze bolt system. I've found that I still need to use the LocTite. BUT it is much easier to remove the nut when needed. Just loosen the squeeze bolt and then loosen the nut. Cheers Astromybud Quote
NYUK Posted December 14, 2003 Report Posted December 14, 2003 i had one from hy tech atv, similar to the double lonestar, round with two allen pinchbolts.needed no loctite and never came loose. Quote
Meat Posted December 14, 2003 Report Posted December 14, 2003 I have one made by AlloySpecialties. I dont use loc-tite, just tighten up the 2 allen pinch bolts. I rode all spring, summer and fall with it and I needed to tighten it twice. I would get loose just enuf that my sprocket hub could move back and forth, id tighten up the axle nut and it would be good for 3 more months. It hasnt come loose since the last time I tighten it, about 2 months ago. Dan from AS used to post here, but I havent seen him in along time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.