836gatorbanshee Posted July 9, 2019 Report Posted July 9, 2019 I have a 7mill banshee that when i ride it a half throttle its fine but when i give it full throttle in the higher gear it fall on it face .. 7mill with 19cc big bore domes. 68 driveline performance cylinder and i live in Florida Quote
ClaudeMachining Posted July 9, 2019 Report Posted July 9, 2019 Carbs and jetting??? He used to run good??Envoyé de mon SM-G965W en utilisant Tapatalk Quote
SKEETER Posted July 10, 2019 Report Posted July 10, 2019 2 hours ago, ClaudeMachining said: Carbs and jetting??? He used to run good?? Envoyé de mon SM-G965W en utilisant Tapatalk That's sexist of you to assume it's a "he"... Quote
Ayesully810 Posted July 10, 2019 Report Posted July 10, 2019 1 hour ago, SKEETER said: That's sexist of you to assume it's a "he"... exactly. why you think its called a banSHEE not a banhee FLORIDA what is your current jetting on your setup, what carbs and pipes Quote
836gatorbanshee Posted July 10, 2019 Author Report Posted July 10, 2019 Shearer's inframe pipes the crabs 36carbs but im going to put 40mmcarb Quote
Ayesully810 Posted July 11, 2019 Report Posted July 11, 2019 4 hours ago, 836gatorbanshee said: Shearer's inframe pipes the crabs 36carbs but im going to put 40mmcarb WHAT JETS ARE IN IT?? pilot needle type and clip position and main jet Quote
836gatorbanshee Posted July 12, 2019 Author Report Posted July 12, 2019 Clip in 3 position needle jet idk Quote
Ayesully810 Posted July 12, 2019 Report Posted July 12, 2019 Okay well find out all the jets that are in it, hard to help when you dont know what you have. I have a 7 as well and I have a 50 pilot, CEL needle on 2nd clip and 158 main jet if that helps Quote
ginger Posted July 12, 2019 Report Posted July 12, 2019 jetting also is based off your carb size, so pick a carb before we give you numbers as well. Quote
836gatorbanshee Posted November 9, 2019 Author Report Posted November 9, 2019 Pwk 40 needle on 1 jets is 180 and 55 Quote
836gatorbanshee Posted November 9, 2019 Author Report Posted November 9, 2019 I have to easy in the gas and it runs like a bat out hell but I can't dump it out of the or it will bog. Going threw the gear it will foul the plug and push one of the plug tip In, I'm running 260 gt race gas Quote
locogato11283 Posted November 9, 2019 Report Posted November 9, 2019 Main jet is way too big. Drop to a 165 and test from there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.