Keno Posted December 5, 2018 Report Share Posted December 5, 2018 I follow the instructions on the fogging oil. With engine running apply light throttle, spray into each carb intake untill motor almost stalls. Stop motor, spray in each spark plug hole. Works great on jetskis with steel sleeves. Quote Link to comment Share on other sites More sharing options...
kawa110 Posted December 5, 2018 Report Share Posted December 5, 2018 Which brand fogging oil? Quote Link to comment Share on other sites More sharing options...
Keno Posted December 6, 2018 Report Share Posted December 6, 2018 I've used stabil, crc, and stabrite. Usually whatever i can find. Quote Link to comment Share on other sites More sharing options...
Man-O-Steele Posted December 6, 2018 Report Share Posted December 6, 2018 I did nothing last year and 3 out of 4 of our bikes were froze. Went to kick and they wouldn't roll over. Kept pressure on the kicker and they all finally rolled over and fired right up. Never had an issue after that bikes run fine. Quote Link to comment Share on other sites More sharing options...
Man-O-Steele Posted December 6, 2018 Report Share Posted December 6, 2018 I guess I should add before everyone has a meltdown that I dont reccomend doing what I did and I'm not saying it will be ok. I'm just sharing what happened to me and i should also add that I was using klotz techniplate. Quote Link to comment Share on other sites More sharing options...
PaymentPlan Posted December 6, 2018 Report Share Posted December 6, 2018 13 hours ago, Man-O-Steele said: I guess I should add before everyone has a meltdown that I dont reccomend doing what I did and I'm not saying it will be ok. I'm just sharing what happened to me and i should also add that I was using klotz techniplate. Did you end up switching to R50 after that experience? Quote Link to comment Share on other sites More sharing options...
Man-O-Steele Posted December 7, 2018 Report Share Posted December 7, 2018 11 hours ago, PaymentPlan said: Did you end up switching to R50 after that experience? I actually just kept using what I had and start the bikes more frequently. I have since switch to amsoil dominator and thinking about blending it castor oil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.