jtl1567 Posted July 10, 2017 Report Posted July 10, 2017 Hey everyone, I'm new to the forums and banshees. I picked one up recently and i want to do a full restoration on it. It has been modified and it has a yz400f motor in it. Right now i am just going to disassemble down to the frame and rebuild it myself. As of right now i have a few questions, 1. It was modified by having the two upright supports in the center of the frame cut out and one installed the center of the frame to support the motor, is that normal for this mod? 2. on the right handle which is a twist throttle ugh , it has the brake lever then another lever.. i traced it and it goes to the top front of the motor.. what is that? Thats it for now. Thanks! Quote
trickedcarbine Posted July 10, 2017 Report Posted July 10, 2017 Are you trying to go back to a banshee motor? If so, consider getting another frame. Quote
jtl1567 Posted July 10, 2017 Author Report Posted July 10, 2017 I have considered getting a new frame and motor. Any places i can get a decent deal? I am in Idaho. you? Quote
jtl1567 Posted July 10, 2017 Author Report Posted July 10, 2017 oh and that mystery lever i believe is the decomp lever Quote
registered user Posted July 10, 2017 Report Posted July 10, 2017 its mind boggling why someone would waste a single moment putting yz400f in these turd bucket boat anchors. more baffling is that dipshit tryin to use the harley mtr. i feel like chugging 10gal of cyanide to ease the pain from this stupidity Quote
jtl1567 Posted July 10, 2017 Author Report Posted July 10, 2017 thats what i thought. it was just a 200 to pick up the quad. it would start but didnt do anything else with it. Quote
jtl1567 Posted July 10, 2017 Author Report Posted July 10, 2017 i would like to build a banshee from the ground up but also try to be pocket friendly Quote
registered user Posted July 10, 2017 Report Posted July 10, 2017 get away from these things fast as u can . they barely worth pennies on the dollar after u spend your lifes savings. practically cant give em away Quote
Ayesully810 Posted July 10, 2017 Report Posted July 10, 2017 15 hours ago, registered user said: its mind boggling why someone would waste a single moment putting yz400f in these turd bucket boat anchors. more baffling is that dipshit tryin to use the harley mtr. i feel like chugging 10gal of cyanide to ease the pain from this stupidity Really? you know hes trolling right... Quote
ginger Posted July 10, 2017 Report Posted July 10, 2017 building a banshee and pocket friendly do not go together. thats like oil and water. Quote
PaymentPlan Posted July 11, 2017 Report Posted July 11, 2017 Hey everyone, I'm new to the forums and banshees. I picked one up recently and i want to do a full restoration on it. It has been modified and it has a yz400f motor in it. Right now i am just going to disassemble down to the frame and rebuild it myself. As of right now i have a few questions, 1. It was modified by having the two upright supports in the center of the frame cut out and one installed the center of the frame to support the motor, is that normal for this mod? 2. on the right handle which is a twist throttle ugh , it has the brake lever then another lever.. i traced it and it goes to the top front of the motor.. what is that? Thats it for now. Thanks!Let's see some pictures. Sent from my SM-G900V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.