Baileycakes Posted February 17, 2017 Report Posted February 17, 2017 I'm installing a new clutch cover and i need to know if the new gasket goes on dry? Or If i will need to apply oil or a grease to the cover?? I'm new so there more specific the better! Thanks Quote
sheerider11 Posted February 17, 2017 Report Posted February 17, 2017 I use assembly lube or white lithium to hold it in place Quote
Baileycakes Posted February 17, 2017 Author Report Posted February 17, 2017 Is Bel-Ray waterproof grease good to use? Quote
sheerider11 Posted February 17, 2017 Report Posted February 17, 2017 Is Bel-Ray waterproof grease good to use?Yeah, Vaseline would probably be fine Quote
Baileycakes Posted February 17, 2017 Author Report Posted February 17, 2017 That's not a bad idea.... To install it dry. I'll try it dry because the clutch cover was purchased on eBay and I guess I rather know now if it is not in good shape.... Thanks Quote
Keno Posted February 17, 2017 Report Posted February 17, 2017 I grease it to hold it in place. Probably doesn't matter either way. Sent from my XT1585 using Tapatalk Quote
RagunCajun Posted February 17, 2017 Report Posted February 17, 2017 With grease, lube or trans fluid, does the gasket still stay stuck sometimes when you remove it in the distant future? Quote
sheerider11 Posted February 18, 2017 Report Posted February 18, 2017 With grease, lube or trans fluid, does the gasket still stay stuck sometimes when you remove it in the distant future?I've been hit or miss with that. Some slipped right off while others ripped. Quote
sleeper06 Posted February 18, 2017 Report Posted February 18, 2017 The metal ones are more forgiving Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.