Shanepaul Posted January 27, 2017 Report Posted January 27, 2017 I know the carb and slide are different between the choke and non choke carb but today during my carb cleaning I noticed the lack of the brass tube on the non choke carb as pictured below. Is this normal or is it missing? Sent from my iPhone using Tapatalk Quote
hoppedupandcutdown Posted January 27, 2017 Report Posted January 27, 2017 That's what picks up fuel for the choke - it's normal 1 Quote
Shanepaul Posted January 27, 2017 Author Report Posted January 27, 2017 Ok. Thank you! Sent from my iPhone using Tapatalk Quote
trickedcarbine Posted January 27, 2017 Report Posted January 27, 2017 Had the rubber choke tube between them? Quote
Shanepaul Posted January 27, 2017 Author Report Posted January 27, 2017 Nope. It's got the nubs on the carbs but they look solid, no thru holes Sent from my iPhone using Tapatalk Quote
trickedcarbine Posted January 27, 2017 Report Posted January 27, 2017 There is supposed to be a tube between the two carbs. Quote
TrickedCarbine01 Posted January 27, 2017 Report Posted January 27, 2017 Like that. Also the bowls are left and right specific. Slides as well. Sent from my iPhone using Tapatalk Quote
Shanepaul Posted January 27, 2017 Author Report Posted January 27, 2017 The banshee came from California. Ran great out there. Shipped it to upstate NY in October and it wouldn't run that great. Hard to start etc. Took carbs off to go through them and that's where I'm at now. That explains it. Never would have thought because the tube wasn't on there. Put a new piece of fuel line there now. Thank you for your expertise! Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.