arena314 Posted October 27, 2016 Author Report Posted October 27, 2016 I sprayed through them on both bowls and the spray just bounced back out the same hole Sent from my SM-G935T using Tapatalk Quote
hoppedupandcutdown Posted October 27, 2016 Report Posted October 27, 2016 I sprayed through them on both bowls and the spray just bounced back out the same hole Sent from my SM-G935T using Tapatalk not good, you don't have a bowl to feed your choke circuit then Quote
sheerider11 Posted October 27, 2016 Report Posted October 27, 2016 I sprayed through them on both bowls and the spray just bounced back out the same hole Sent from my SM-G935T using Tapatalk So then it didn't do what he asked Quote
edgehanger Posted October 27, 2016 Report Posted October 27, 2016 You either don't have a choke bowl or the choke bowl is on the wrong carb or the choke circuit is clogged. Some bikes will cold start with out choking. Most will not. Sent from my GT-I9500 using Tapatalk Quote
arena314 Posted October 27, 2016 Author Report Posted October 27, 2016 so you guys think I have 2 of the same bowls? and back when it was running when you would choke it while it was warm it would shut off doesn't that mean my choke is functioning? Sent from my SM-G935T using Tapatalk Quote
hoppedupandcutdown Posted October 27, 2016 Report Posted October 27, 2016 You can have two of the same as long as that passage is clear. And you have yet to confirm that. need to pour not spray in the red arrow hole, got a eye dropper? Quote
arena314 Posted October 27, 2016 Author Report Posted October 27, 2016 yeah I should have something that will work and I'll re check it again later and let you know Sent from my SM-G935T using Tapatalk Quote
sleeper06 Posted October 27, 2016 Report Posted October 27, 2016 Do a leakdown test and get an idle screw kit , you can't use cable play as idle adjustment 1 Quote
arena314 Posted October 28, 2016 Author Report Posted October 28, 2016 I was running without idle screws on my last shee Sent from my SM-G935T using Tapatalk Quote
ginger Posted October 28, 2016 Report Posted October 28, 2016 just because it was running that way doesnt mean it was right. 2 Quote
arena314 Posted October 30, 2016 Author Report Posted October 30, 2016 it's been a few days since I've had time to look at the banshee. within the next day or 2 I'm going to pull the carb bowls and make sure I have the right ones then go from there Sent from my SM-G935T using Tapatalk Quote
arena314 Posted October 30, 2016 Author Report Posted October 30, 2016 and btw I have a blaster carburetor sitting around and I'd imagine that that bowl has the little just thing could I use that bowl on tbe left carb? Sent from my SM-G935T using Tapatalk Quote
hoppedupandcutdown Posted October 30, 2016 Report Posted October 30, 2016 Probably. But wouldn't it be nice to know if what you are running was the problem or not? That would make it easier to move forward in correcting your issue. 1 Quote
arena314 Posted October 30, 2016 Author Report Posted October 30, 2016 so should I just throw it on tbe left carb? Sent from my SM-G935T using Tapatalk Quote
arena314 Posted October 30, 2016 Author Report Posted October 30, 2016 turns out both carbs had the same bowl. put the blaster bowl on and the quad started right up now I just gotta play with the throttle cable bc it's binding and sticking somewhere. I'll probably re route it but the bowl was the issue Sent from my SM-G935T using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.