CFH87 Posted May 21, 2016 Report Posted May 21, 2016 Anyone running one of these yet? Already have a drag port stock cyl 4 mil but haven't buttoned it up yet. Been looking at these and the numbers seem to be promising.... Gunna be running shearer oofs and alky for those wondering.... Quote
Surfrjag Posted May 22, 2016 Report Posted May 22, 2016 I been waiting for bill to send me a set to fully test.. 2 Quote
CFH87 Posted May 22, 2016 Author Report Posted May 22, 2016 I've been thinking about pulling the trigger on a set as well. Just wanna see some numbers on alky. Quote
BANSHEE HP Posted May 24, 2016 Report Posted May 24, 2016 If my 465 made 117 and Lanes 443 made 110 a 421 will make 104 just by the math. 1 Quote
Larry's Shee Posted May 25, 2016 Report Posted May 25, 2016 If my 465 made 117 and Lanes 443 made 110 a 421 will make 104 just by the math. That's not using that Common Core math is it ?? Quote
ClaudeMachining Posted May 25, 2016 Report Posted May 25, 2016 It would be 103hp. Formula is HP = (7/22)* Engine Size-30.95 Bill did a rules of three. You took the time to do a linear interpolation juste to be right by 1 hp? Lol! Envoyé de mon GT-P5113 en utilisant Tapatalk Quote
ClaudeMachining Posted May 25, 2016 Report Posted May 25, 2016 No, I looked at the presented data and could see it should be 103hp. I then created the formula to show the math.It's a simple linear interpolation. It cant be other wise, math wise. Envoyé de mon GT-P5113 en utilisant Tapatalk Quote
n2otoofast4u Posted May 25, 2016 Report Posted May 25, 2016 I've been thinking about pulling the trigger on a set as well. Just wanna see some numbers on alky.Gonna put it in your Wheelman chassis? Sent from my SCH-I545 using Tapatalk 1 Quote
CFH87 Posted May 26, 2016 Author Report Posted May 26, 2016 No story just n2idiot beating a dead horse. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.