Mull engineering quik shift kit

[jeff n]

Has anyone ever ran or heard about mull engineering quik shift kit. It says by electronically interrupting the engine power you can shift with out using the clutch or letting off the throttle and will not cause any damage to motor or tranny.

 

 

Sent from my LG-H811 using Tapatalk

[trickedcarbine]

Not sure if the idea ever took off. Brandon at Mull is pretty good at responding to PM's. Shoot him a message.

 

Personally, I'd reccomend just getting the trans cut next time the motor is serviced.

[ATVridinMaNiAc]

Yea mull is good stuff a have a few of his things so i wouldnt question his work. That reminds me of the old days when people would kill switch shift on older dirt bikes. Hold it wide open and shift at the same time u press kill button.

[jeff n]

Not sure if the idea ever took off. Brandon at Mull is pretty good at responding to PM's. Shoot him a message.

 

Personally, I'd reccomend just getting the trans cut next time the motor is serviced.

Is he a member here? If so what's his profile name?

 

Sent from my LG-H811 using Tapatalk

[bigweav81]

Don't hold me to it, but blowit I believe is his user name.

 

sent from yo mammy house.

[hoppedupandcutdown]

correct

[jeff n]

Thanks

 

Sent from my LG-H811 using Tapatalk