jrevans2571 Posted March 27, 2016 Report Posted March 27, 2016 Bought banshee that's been sitting for months. Wouldn't start. Took carbs off and cleaned. Put in new plugs. New gas. Now I can get it to start but it won't Rev up. When I give it gas it "burps" if that makes sense. Someone told me to run it to try to clear it out and when I take off it won't go no faster than maybe 10 miles an hour in every gear. What do I need to look for too fix this problem? Or problems? Thanks a million in advance Sent from my SM-N910V using Tapatalk Quote
sheerider11 Posted March 27, 2016 Report Posted March 27, 2016 Look up TORS and the parking brake. It'll show your how to disable them 1 Quote
jrevans2571 Posted March 27, 2016 Author Report Posted March 27, 2016 Could it be anything outside of that? I've been researching that stuff. The person that has it before me cut all the wires right at the tors where they go into the carbs Sent from my SM-N910V using Tapatalk Quote
sheerider11 Posted March 27, 2016 Report Posted March 27, 2016 Could it be anything outside of that? I've been researching that stuff. The person that has it before me cut all the wires right at the tors where they go into the carbs Sent from my SM-N910V using Tapatalk could be plenty of issues. But there easy and are a common bogging issue. Just double check the box is un plugged. Quote
jrevans2571 Posted March 27, 2016 Author Report Posted March 27, 2016 For the tors? Under the gas tank? Sent from my SM-N910V using Tapatalk Quote
jrevans2571 Posted March 27, 2016 Author Report Posted March 27, 2016 Did that. Still does it. Someone said possibly compression? Sent from my SM-N910V using Tapatalk Quote
sheerider11 Posted March 27, 2016 Report Posted March 27, 2016 Could be. Like I said, could be plenty of things Quote
n2otoofast4u Posted March 27, 2016 Report Posted March 27, 2016 So you bought the bike without hearing it run? Was it free? Quote
jrevans2571 Posted March 27, 2016 Author Report Posted March 27, 2016 Pretty much. Too cheap to pass up. I know I'm going to have to put money into it but a friend needed some help so I took it off his hands Sent from my SM-N910V using Tapatalk Quote
jrevans2571 Posted March 27, 2016 Author Report Posted March 27, 2016 I guess I'm just looking for a good starting point outside of the tors and brake Sent from my SM-N910V using Tapatalk Quote
n2otoofast4u Posted March 27, 2016 Report Posted March 27, 2016 Tear completely down. Clean, inspect, repair, replace, modify, reassemble. Quote
guns4children Posted March 28, 2016 Report Posted March 28, 2016 Clean your carbs and air filters. Quote
jrevans2571 Posted March 28, 2016 Author Report Posted March 28, 2016 Cleaned carbs. New plugs and fresh gas. Going to check pipes. Sent from my SM-N910V using Tapatalk Quote
guns4children Posted March 28, 2016 Report Posted March 28, 2016 Just for shits take the air filters off and see if it still does it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.