Dan7305 Posted March 24, 2016 Report Share Posted March 24, 2016 I split my case this morning to get at the crank, bearings are shot, flywheel nut galled on its way off. I'm just getting a new crank. Amazon has Hotrods crank, 2 day shipping. Dennis Kirk has a seal kit, but I didn't know about the transmission shaft keeper that hides behind the clutch basket while separating the case, and I managed to crack it. Where can I get that keeper? Is the dealer my only option? Where could I pull the part number for that? For this crank, http://smile.amazon.com/Hot-Rods-4001-Crankshaft/dp/B000FTEVQK?ie=UTF8&psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=ATVPDKIKX0DER And this seal kit, https://www.denniskirk.com/cometic/bottom-end-gasket-kit-c7094be.p265747.prd/265747.sku Is there anything else that I am going to need, besides that keeper? I'm thinking I should get a manual also, so I know torque specs. Thanks in advance, I'm going to crawl in to bed, I'll check back when I get up this afternoon. Quote Link to comment Share on other sites More sharing options...
Dan7305 Posted March 24, 2016 Author Report Share Posted March 24, 2016 Never mind on the keeper, I found it on bikebandit. I should be able to have the local dealer get it for me. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted March 24, 2016 Report Share Posted March 24, 2016 I can't even count the number of places on this list http://www.bansheehq.com/bansheehq-sponsors/that can sell you the same things at the same prices and EVERYTHING else you will need in one order. AND be able to give you expert technical advise before, during and after your purchase on BANSHEE's. NEITHER of those two places (edit, 3) that you mentioned can do either of those things. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted March 24, 2016 Report Share Posted March 24, 2016 What state are you in? We can recommend a BHQ sponsor that is close to you. Quote Link to comment Share on other sites More sharing options...
Dan7305 Posted March 24, 2016 Author Report Share Posted March 24, 2016 I'm in the twin cities of mn. I never even thought about looking at sponsors... Quote Link to comment Share on other sites More sharing options...
camp0429 Posted March 24, 2016 Report Share Posted March 24, 2016 Call FAST, tell him you want Hot Rods crank trued and welded. Done deal Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted March 25, 2016 Report Share Posted March 25, 2016 Call FAST, tell him you want Hot Rods crank trued and welded. Done deal Yep. Maybe consider a 4 mill since you have to replace the crank. Quote Link to comment Share on other sites More sharing options...
Dan7305 Posted March 25, 2016 Author Report Share Posted March 25, 2016 I had thought about it, but I just got the cylinders back from being bored and ported. Given that, I ordered the stock length from them, and cancelled the one from Amazon. Unless I'm misinformed and everything's the same other than the crank. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted March 26, 2016 Report Share Posted March 26, 2016 You should be good to go. It would be best to start over with different cylinders since yours are already ported for the stock stroke crank. Quote Link to comment Share on other sites More sharing options...
Dan7305 Posted March 26, 2016 Author Report Share Posted March 26, 2016 That's what I thought. Stock it is. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.