prop bender Posted February 6, 2016 Report Share Posted February 6, 2016 I stripped the threads on the frame where the bearing retainer goes in for the steering stem. Is it a must that the restrainer goes back in? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted February 6, 2016 Report Share Posted February 6, 2016 Yes, That will be what keeps the handlebars from meeting your chin. Quote Link to comment Share on other sites More sharing options...
prop bender Posted February 6, 2016 Author Report Share Posted February 6, 2016 Ha! But that bearing retainer is only keeping the bearing from coming out and I don't see the bearing being able to just pop out since its a bitch just knocking it out with a socket and hammer,and the stem is also bolted to the upper frame. Just seeing what's up! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted February 6, 2016 Report Share Posted February 6, 2016 I encourage you to thoroughly re-examine your assessment of said situation. 3 Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted February 6, 2016 Report Share Posted February 6, 2016 WOW Quote Link to comment Share on other sites More sharing options...
prop bender Posted February 6, 2016 Author Report Share Posted February 6, 2016 I guess 8 24oz has got me a little stupid. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sixfiveyeti Posted February 6, 2016 Report Share Posted February 6, 2016 I stripped the threads on the frame where the bearing retainer goes in for the steering stem. Is it a must that the restrainer goes back in? Sent from my iPhone using Tapatalk Is that fresh powder coat?!? Did you put a new bearing in there? Quote Link to comment Share on other sites More sharing options...
prop bender Posted February 6, 2016 Author Report Share Posted February 6, 2016 Yup Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted February 6, 2016 Report Share Posted February 6, 2016 Woah yeah you fucking need that. Quote Link to comment Share on other sites More sharing options...
prop bender Posted February 6, 2016 Author Report Share Posted February 6, 2016 Whatcha saying Dickrider11? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted February 6, 2016 Report Share Posted February 6, 2016 Whatcha saying Dickrider11? Sent from my iPhone using Tapatalk well I was going to tell you how I fixed about 3 of them but you can figure it out now on you're own. Quote Link to comment Share on other sites More sharing options...
prop bender Posted February 6, 2016 Author Report Share Posted February 6, 2016 Right on thanks homie Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
prop bender Posted February 6, 2016 Author Report Share Posted February 6, 2016 What do you got rider? Typing error Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted February 6, 2016 Report Share Posted February 6, 2016 Take the retainer and cut a groove at an angle with the finest cut off wheel. I use a dremel. Sometimes I'll do 2 or 3. You basically make it into a tap. It will usually chase the threads threads as long as there not destroyed. Go in a bit and back off and keep doing that to clean everything out. Use plenty of lube too. Quote Link to comment Share on other sites More sharing options...
ban565 Posted February 6, 2016 Report Share Posted February 6, 2016 What do you got rider? Typing error Sent from my iPhone using Tapatalk You might try apologizing to sheerider11 before you blame your fat fingers. He was trying to help you. jmo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.