Hinson 8 plate inner basket ?

[.:angel:.]

Sup hq

If i get the hinson 8 plate inner clutch basket do i need to use the hinson pressure plate or can i run a stock pressure plate??

[speeshee]

Just buy the full Hinson kit. Expensive but no doubt the best clutch parts.

 

 

Sent from my iPhone using Tapatalk

[registered user]

Best bang for the buck right here http://www.motosport.com/hinson-8plate-clutch-kit. 

$819 is a ripoff. $692 http://www.ebay.com/itm/HINSON-COMPLETE-CLUTCH-KIT-YAM-HC016-/262153152275?hash=item3d098ba713:g:qXIAAOSwHQ9WT-d~&vxp=mtr

[.:angel:.]

Seen them for 580 for all 3 at the TDR website

[registered user]

$580 for the HC016 ? seems like a good deal then. far cheaper than what ive been able to find

[.:angel:.]

$580 for the HC016 ? seems like a good deal then. far cheaper than what ive been able to find

They dont have it as a kit but when added together in cart its 580

[registered user]

I see now. $580 doesn't have springs or plates that's why its cheaper.

[registered user]

get the 580 deal and the $74 driveline clutch from ebay and your in business. then again you better check ebay because you might find those parts cheaper than $580 im thinking

Edited January 24, 2016 by registered user

[.:angel:.]

get the 580 deal and the $74 driveline clutch from ebay and your in business. then again you better check ebay because you might find those parts cheaper than $580 im thinking

Yea gona keep looking before i pull the trigger..

[registered user]

ive only glanced at the tdr site a few times but his prices don't seem very good. ebay seems to be the way to go from my experience

[trickedcarbine]

ive only glanced at the tdr site a few times but his prices don't seem very good. ebay seems to be the way to go from my experience

I've seen him stock Japanese bearings cheaper then everybody.

[registered user]

tdr sells a lot of items and some may be reasonably priced but some are way out in left field. his hinson straight cuts for $700. bought some new a month or so ago for $600 to my door from ebay. his $80 nachi roller bearing is full blown retail. the finest german rollers can be had for about $50

[Tony Doukas Racing]

Most of my customers do not know this but we have to advertise at a specific minimum  retail price or we lose our dealer status.   Those that sell for cheaper on EBAY eventually get caught and the price either changes or they are dropped by the supplier.