PaymentPlan Posted January 5, 2016 Author Report Posted January 5, 2016 Do a little searching on here and you will find threads on how to build a proper setup. I can post pics of what I have I you need. Thanks, I'll do my reading soon to build one. I appreciate it. Sent from my SM-G900V using Tapatalk Quote
PaymentPlan Posted January 5, 2016 Author Report Posted January 5, 2016 To check out how much rubber is remaining on your handle bar grips! 0.01 can kill you!Haha true. Sent from my SM-G900V using Tapatalk Quote
PaymentPlan Posted January 5, 2016 Author Report Posted January 5, 2016 too fucking bad... Sent from my LGLS740 using Tapatalk Lol Sent from my SM-G900V using Tapatalk Quote
lil Doobie420 Posted January 5, 2016 Report Posted January 5, 2016 Lol Sent from my SM-G900V using Tapatalk dudes a strait fuckin tard.... Sent from my LGLS740 using Tapatalk Quote
hoppedupandcutdown Posted January 6, 2016 Report Posted January 6, 2016 You'll need a tool to R&R the steering stem bearing retainer nut. The large hex on a flywheel puller will work. It's 30mm or 1 1/8" will fit. Or put together a bolt and 2 nuts, or 1 nut if ya got a welder. Or 1 nut and an old socket... 1 Quote
PaymentPlan Posted January 6, 2016 Author Report Posted January 6, 2016 Good deal Sent from my SM-G900V using Tapatalk Quote
ScEaMin BaNsheE 305 Posted January 7, 2016 Report Posted January 7, 2016 get bolt that fits then use a small pipe wrench to loosen Quote
Sandking Posted January 7, 2016 Report Posted January 7, 2016 Bolt with 1 1/8 head and two nuts works Quote
willaduncan Posted January 7, 2016 Report Posted January 7, 2016 Bolt with 1 1/8 head and two nuts worksJust use the flywheel puller it works just fine Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.