Shaun Amori Shawna Posted June 28, 2015 Report Posted June 28, 2015 This is the 2x my stator side bearing went out. You guys think my case is shot and messing my stator side bearing up. Thanks guys Quote
dirtmunkee Posted August 1, 2015 Report Posted August 1, 2015 Damn guess someone would have gave some sort of response. But i dont see it being the cases if the crank bearings sit good and tight in the case. Sounds to me like the flywheel is not on perfectly centered or out of whack and causing a slight vibration. From what i have read and understand if the shaft key isnt in just right it can cause flywheel not to seat right. Or maybe crank seal isnt sealing well and not keeping bearing lubed well. Just some thoughts. Quote
Larry's Shee Posted August 3, 2015 Report Posted August 3, 2015 If the seal was bad it would run lean on that side. Was the fly wheel lapped to the shaft? Suggest having crank checked for straight when you have it out, and don't use cheep bearing. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.