Moe.Laub Posted June 6, 2015 Report Posted June 6, 2015 Got a set of cases from my buddy and can somebody tell me why this hollow parts are filled with liquid nails. There are no cracks anywhere so I don't have an answer. Quote
Moe.Laub Posted June 6, 2015 Author Report Posted June 6, 2015 Ya idn what's goin on. I'm curious if they were filled for maby a boosted application. Only thing I can think of Quote
BANSHEE HP Posted June 6, 2015 Report Posted June 6, 2015 its epoxy so when its trenched for larger strokes Quote
Atomic Monkey Posted June 6, 2015 Report Posted June 6, 2015 Flip it over and get a pic of that up. Curious to see what the transition into the transfers looks like. Quote
BANSHEE HP Posted June 6, 2015 Report Posted June 6, 2015 they may be ok to use, they may be complete junk... theres many things that could determine whether cases are useable or not Quote
Moe.Laub Posted June 6, 2015 Author Report Posted June 6, 2015 I'll take some pics tomarrow and post em. Thanks guys Quote
trickedcarbine Posted June 6, 2015 Report Posted June 6, 2015 Usually you don't see that with out trenching. There appears to be a blob flowing in to the transmission case area as well? Quote
Moe.Laub Posted June 6, 2015 Author Report Posted June 6, 2015 Yes there is. I sanded it down so the trans will clear all of it Quote
sleeper06 Posted June 6, 2015 Report Posted June 6, 2015 I've seen it plenty as bhp said on larger strokes , who knows maybe someone planned on trenching and never went through with it. I have filled the top case in the back to play with aux transfer fuel entry but that clearly was not well thought out Quote
registered user Posted June 7, 2015 Report Posted June 7, 2015 Who ever did it looks like they filled up the dowel pin hole and probly half the stud holes then tried to file it down with a cheese grater. Have fun with that mess Quote
sprinklerman Posted June 7, 2015 Report Posted June 7, 2015 Trash can those. Sealing surface looks fubared. Quote
Moe.Laub Posted June 8, 2015 Author Report Posted June 8, 2015 It's gunna be a 4mill long rod motor. The dowels were filled a little bit but I cleaned them out and the buildup or epoxy was kinda high so filed everything down flat. Rumor is these cases came from Brad Tyson. Quote
trickedcarbine Posted June 9, 2015 Report Posted June 9, 2015 It's gunna be a 4mill long rod motor. The dowels were filled a little bit but I cleaned them out and the buildup or epoxy was kinda high so filed everything down flat. Rumor is these cases came from Brad Tyson.I to have a set of epoxied Tyson cases. They sit on the shelf.... Mock up only. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.