Moe.Laub Posted May 21, 2015 Report Posted May 21, 2015 This crank has anywhere from 10-15 hours on it. It is welded and balanced. Rods have no more play than there supposed to. They Feel the same as my brand new crank. Looking to get 300.00 obo shipped. Quote
bigweav81 Posted May 21, 2015 Report Posted May 21, 2015 Those aren't vitos rods. Unless that's what the older style looked like. 1 Quote
472 supercub Posted May 21, 2015 Report Posted May 21, 2015 rite new style has billet rods humm Quote
Atomic Monkey Posted May 21, 2015 Report Posted May 21, 2015 Most likely 29L rods, that's what are on the short rod Vito's crank I have laying around. Quote
Moe.Laub Posted May 21, 2015 Author Report Posted May 21, 2015 The rod says 29l in the picture. It is a short rod vitos crank Quote
sheerider11 Posted May 21, 2015 Report Posted May 21, 2015 The pins look stock stroke location. Quote
BANSHEE HP Posted May 21, 2015 Report Posted May 21, 2015 The pins look stock stroke location. They do look like theyre in stock location. vitos rods were... 29L=110mm rod 30L=115mm rod and now they are laser etched what they are on the rod. Quote
sheerider11 Posted May 21, 2015 Report Posted May 21, 2015 They do look like theyre in stock location. vitos rods were... 29L=110mm rod 30L=115mm rod and now they are laser etched what they are on the rod. So going by this info. Stock stroke stock rod crank. Sent from my iPhone using Tapatalk Quote
Moe.Laub Posted May 21, 2015 Author Report Posted May 21, 2015 (edited) I was researching the numbers (29l) and letters (pc) on the crank and rods and I got 4mil stock rod crank. Edited May 21, 2015 by Moe.Laub Quote
bigweav81 Posted May 24, 2015 Report Posted May 24, 2015 Can anyone vouch this as a 4mil?..........banshee hp? sent from yo mammy house Quote
BANSHEE HP Posted May 24, 2015 Report Posted May 24, 2015 Can anyone vouch this as a 4mil?..........banshee hp? sent from yo mammy house stock stroke, unless some better pics prove otherwise Quote
bigweav81 Posted May 24, 2015 Report Posted May 24, 2015 I was researching the numbers (29l) and letters (pc) on the crank and rods and I got 4mil stock rod crank.Post some better pics. Know a guy who may be interested........4mil or ss, but your not going to get 300$ out of it either way. Pto side bearing looks rough. Have any wobble to it? sent from yo mammy house Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.