highcomp26 Posted April 11, 2015 Report Posted April 11, 2015 I cut my chain on my banshee its a DID 520 0 oring , why cant any 520 masterlink fit in it? I have tried many different links and none fits. Do I need to order a special DID masterlink? Quote
camp0429 Posted April 11, 2015 Report Posted April 11, 2015 I take my chains to a local shop, they have tons of different master links, just keep tryin until we find on that fits right Quote
Nightmare Posted April 12, 2015 Report Posted April 12, 2015 If you have a cycle gear near you they'd probably have one. Quote
highcomp26 Posted April 12, 2015 Author Report Posted April 12, 2015 I took it to cycle gear, nothing. I even walked with a piece of the link. Quote
bigweav81 Posted April 12, 2015 Report Posted April 12, 2015 Buy a new chain. Sent from your mammy house Quote
hoppedupandcutdown Posted April 12, 2015 Report Posted April 12, 2015 I run a DID chain advertised with thicker side plates and I know other links won't fit it. Also ran in to that problem on my kids LT80. I always get a master for the specific chain now. 1 Quote
locogato11283 Posted April 12, 2015 Report Posted April 12, 2015 I ran into the same issue with DID. I quit running that stuff and went with WPS. I also make a point to order 4-5 master links with a new chain. Quote
Nightmare Posted April 12, 2015 Report Posted April 12, 2015 I ran into the same issue with DID. I quit running that stuff and went with WPS. I also make a point to order 4-5 master links with a new chain.I've seen the wps stuff, I'll be going that route soon. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.