stock banshee mods

[ImSoBoard1]

if you had $1100 what all would you do to a stock trail riding banshee that is topped out on flats and a small amount of racing

mods im talking about are engine power wise

[Banshee SE]

Elka stage 3 fronts and rear, Vforce reeds, used set of T5!!

[Larry's Shee]

$1000 on clues

$100 on hooker

[Larry's Shee]

 Okay, I'll be reasonable.

$550 on clues

$550 on hookers and blow

[Larry's Shee]

 You can go faster with good suspension,

but have more fun with mo powwa

porting, pipes, maybe VF4s

[trickedcarbine]

Used +2 arms, used works shocks, maybe pipes if ya got enough left.

[itsaripper]

Hi,  Prolly the one thing that will make the most HP on a stock motor is a good set of pipes. Then mill head about 35 thousants, or get a aftermarket head with 19cc domes. The added compression will get you up on the pipe faster. But now you need some higher octane gas. Use a good synthetic oil like AMSoil dominator, or redline, 50 to 1. Add a set of podd air cleaners with covers. Now advance the timeing 4degrees. Get some VForce reeds or port the reed cages and put some Tony Daukes solid .018 thick reed on. Now if you still want to mess with the intake get some 28mm flatslide carbs.  All this will help a stock motor and not cost too much. But the more used to the power you get the need for more power will hit you. Then a port job is now in order. So there are a few ideas to start your addiction to speed.

Edited February 16, 2015 by itsaripper

[Pasi S.]

ImSoBoard1.

Is your Banshee 100% stock?
If not, make a list what you already have.