Kcskindeep84 Posted January 11, 2015 Author Report Share Posted January 11, 2015 It's definitely a hot rods crank but believe stock stroke Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 11, 2015 Report Share Posted January 11, 2015 I though Hot Rods used an anodized spacer between the two inner crank bearings. China copies every thing, it might be a clone. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted January 11, 2015 Report Share Posted January 11, 2015 My old stock stroke HotRods back when I bought my first banshee didn't have annodized center pieces. Totally possible it's just a dinosaur. Quote Link to comment Share on other sites More sharing options...
Driveline Performance Posted January 13, 2015 Report Share Posted January 13, 2015 It's an older Hot Rods crank: stock stroke stock rod length. You can tell that it's a stock stroke by the pin location on the webs. A stroker crank will have outer diameter of the pin almost touching if not into the machined outer face surface...if that makes any sense lol. The logo on the rods is from the company that makes their current crankshafts now just an older version. Y29L stands for 110mm rod which is a similar numbering system as OEM. Have it rebuilt or use for parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.