Launch with override

[MRSHEE2014]

If you had a neutral down 1-6 override could you launch in 2nd ? Or you must launch in first ? Is not duneable transmission. Thanks for opinions and experiences

[#1JUANstunna]

If you had a neutral down 1-6 override could you launch in 2nd ? Or you must launch in first ? Is not duneable transmission. Thanks for opinions and experiences

If you are light and the bike are light enough you can. Some will say to leave in first, but my skinny ass always leaves in 2nd. Dirt, sand, or asphalt? Dirt for me.

[MRSHEE2014]

Sand!

[#1JUANstunna]

Let it rip and see what happens.

[Finch]

im 215 lbs and i always launch in 2nd. with any gearing ive messed with 1st is just two damn short to be any good

[MRSHEE2014]

yes i would tried in a pair of weeks, just feel confused if i need to launch in first because of the override. obviously i will force the second because is not billet but i don`t want to be in dangeours on broken the transmission just for the 2nd launch, the ride will be in the sand, and first is to short and not use a bar .

[#1JUANstunna]

yes i would tried in a pair of weeks, just feel confused if i need to launch in first because of the override. obviously i will force the second because is not billet but i don`t want to be in dangeours on broken the transmission just for the 2nd launch, the ride will be in the sand, and first is to short and not use a bar .

I run a 2-5 override no billet 2nd and haven't had a problem yet.

[MRSHEE2014]

yes but mines starts in first 

[#1JUANstunna]

yes but mines starts in first 

Put it in second and let it rip. You can start in 2nd on a 1-5.

[MRSHEE2014]

Put it in second and let it rip. You can start in 2nd on a 1-5.

THAT´S THE ANSWER !! haha  thanks a lot for the help. !!!!! i hope it will run good launching in 2nd

[#1JUANstunna]

WFO clutch drop and hold on. lol!

[m671054]

You can start off in any gear you can pull on an override.

[MRSHEE2014]

You can start off in any gear you can pull on an override.

Thanks !!

[RagunCajun]

If it bogs, drop a gear next time or change sprockets to get it to launch in 2nd.

[n2otoofast4u]

When I messed with the 1-5 2-5 thing I had a 1-5 cut (I knew Id never need 6th) and welded a stop on the star that would keep it from rolling into 1st when I wanted to start in 2nd. Kind of made it a 2-5 Neutral down, then when I wanted to try first gear Id just swap to normal star to let it into 1st.