8 plate clutch

[BANSHEEBEEFM2M]

Using 3&3 now w/dd lockout +10 arm 73 to 10 paddle SLS haulers

[sprinklerman]

Using 3&3 now w/dd lockout +10 arm 73 to 10 paddle SLS haulers

Should be fine then.

[BANSHEEBEEFM2M]

Have a dd lockout

[locogato11283]

Just add weight..

[BANSHEEBEEFM2M]

That's all? Keep 3/3 or should I put 6 stiff springs. Running 3 drive line drag springs and 3 oem

[BANSHEEBEEFM2M]

Most of my comp is on fb lol .. But I Bought proven setup off a builder in my area. Cases/jugs/domes/crank and his shearers n pwks. Gonna be a 421 cub here soon, I just wanna get my moneys worth out of this motor before I tear it down I just rebuilt it

[dozer]

3 stock 3 stiff 60 grams of weight. i imagine you could use less weight but with a 18dm,alky, oof, 76+ro extremes and 225lb rider mine has never slipped.

[BANSHEEBEEFM2M]

Shee slips a bit off the line now to were I actually have to hold the rear brake before I launch. Is that good or bad?

[n2otoofast4u]

Slips? Brakes? You mean it creeps when you rev it up in gear with the clutch pulled in?

[sprinklerman]

Shee slips a bit off the line now to were I actually have to hold the rear brake before I launch. Is that good or bad?

That's not the clutch slipping, it's lurching,,not completely disengaged for some reason. ( notched basket, warped steels, frictions swollen, cable stretched ,etc)

[BANSHEEBEEFM2M]

Yeah exactly

[locogato11283]

For fuck's sake.

[BANSHEEBEEFM2M]

So just get a new cable basket and clutches and eliminate all that shit from being a possibility?

[sprinklerman]

I'd find out what is actually causing it. That was just a list if possibilities.

[locogato11283]

It's probably just out of adjustment.