mxturd Posted September 1, 2014 Report Posted September 1, 2014 Im going to get some new pods and Im just wondering if anyone runs the ones without the 20 degree angle. Im getting new ones because mine rub on the rear shock crossbrace and are about to develop a hole, so I was thinking that without the angle might work. Im running CPI inframes, so if anyone has any suggestions let me know. I just want my filters to last. Thanks Quote
special06shee Posted September 1, 2014 Report Posted September 1, 2014 I liked my uni filters. The foam is FAR superior in protection compared to paper filters. The uni angle filters have a 15* angle witch keeps them of the frame and the pipes. Quote
Starwriter Posted September 1, 2014 Report Posted September 1, 2014 You want 10 degree so you can angle them to the right. Quote
jbooker82 Posted September 2, 2014 Report Posted September 2, 2014 I run 10 deg 6" pods with CPI's PWK33's, and a one piece billet intake. Once you see where they are rubbing next time you clean the filters clean them real well to remove oil. Then use a little black ultra rtv to seal up that area and to make a rubber pad so they wont wear through any more. Quote
Nightmare Posted September 2, 2014 Report Posted September 2, 2014 I run 10 deg 6" pods with CPI's PWK33's, and a one piece billet intake. Once you see where they are rubbing next time you clean the filters clean them real well to remove oil. Then use a little black ultra rtv to seal up that area and to make a rubber pad so they wont wear through any more.Got a pic? Quote
Nightmare Posted September 2, 2014 Report Posted September 2, 2014 Awesome, thank you. I plan on running the same setup and wanted to kinda get an idea. Quote
mxturd Posted September 2, 2014 Author Report Posted September 2, 2014 Mine are rubbing on the bottom toward the back of the filter, at the cross brace for the rear shock. Im running the 20 degree right now i think, so I guess the 10 degree would pull them away from the cross piece on the bottom of the filter. I guess I will give it a try Quote
mxturd Posted September 2, 2014 Author Report Posted September 2, 2014 And where did you get your 10 degree filters? Quote
jbooker82 Posted September 4, 2014 Report Posted September 4, 2014 I got my filters and the short heat wrap from Cascade . Make sure you let them know you want 10degree angled filters or you might end up with20's. Quote
mxturd Posted September 5, 2014 Author Report Posted September 5, 2014 Alright. Thank you jbooker82. Appreciate the help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.